Analytical Prediction of the Thermal Behavior of Semiconductor Power Devices from Room-Temperature I–V Measurements

Sandor Ress (), Gabor Farkas and Marta Rencz
Additional contact information
Sandor Ress: Department of Electron Devices, Faculty of Electrical Engineering and Informatics, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
Gabor Farkas: Siemens Digital Industry Software, Lajos utca 48-66, H-1036 Budapest, Hungary
Marta Rencz: Department of Electron Devices, Faculty of Electrical Engineering and Informatics, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary

Energies, 2024, vol. 17, issue 12, 1-23

Abstract: The thermal characterization of power devices is an inevitable task in the industry. Thermal transient testing is one of the major tools for this characterization, as it is not only capable of giving information about the actual thermal parameters but may also reveal the root cause of potential device failures. The testing may occur on single packages or modules on a dedicated standard test bench, or “in situ”, in an actual assembly. The testing process itself is very fast in both cases, on the order of seconds, but the transient measurement needs to be preceded by a calibration step to determine the temperature dependence of a temperature-sensitive parameter (TSP) of the semiconductor device. This may require a long time, as the device has to be measured at many stabilized temperatures, which in the case of power devices may take hours. It also has to be considered that, especially in “in situ” measurements, reaching the highest device temperatures of power devices may even damage other parts of the surrounding electronics. Moreover, the temperature distribution inside a module will be different at calibration time than during operation with the same junction temperature, as bond wires and copper traces do not reach the chip temperature in the latter case. This paper presents a methodology that can be used to replace the lengthy measurement of one parameter at many temperatures with a fast single I–V characteristics measurement at room temperature. Physics-based calculations assign a unique temperature-sensitive parameter to each item of interest in the system. After the presentation of the theoretical background, the usability of the method is demonstrated by verifying measurements on silicon power devices.

Keywords: thermal transient measurement; temperature sensitive parameters; temperature-to-voltage mapping; forward voltage; pn junction (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/17/12/2931/pdf (application/pdf)
https://www.mdpi.com/1996-1073/17/12/2931/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:17:y:2024:i:12:p:2931-:d:1414967

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().