Technical Analysis of the Possibility of Burning Hydrogen in Furnaces of the Metallurgical Sector

Andrzej Gołdasz, Karol Sztekler () and Łukasz Mika
Additional contact information
Andrzej Gołdasz: Department of Thermal and Fluid Flow Machines, Faculty of Energy and Fuels, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland
Karol Sztekler: Department of Thermal and Fluid Flow Machines, Faculty of Energy and Fuels, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland
Łukasz Mika: Department of Thermal and Fluid Flow Machines, Faculty of Energy and Fuels, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland

Energies, 2024, vol. 17, issue 18, 1-17

Abstract: This article analyses the possibility of using hydrogen as fuel in furnaces used in the metallurgical industry. The research was conducted for a selected continuous furnace. For this purpose, based on actual measurements, a heat balance of the furnace was prepared to determine its energy indicators. These values were used to verify the developed numerical model in IPSEpro 7.0 software. Numerical calculations were performed for three variants: pure natural gas; 30% hydrogen, 70% natural gas; and 100% hydrogen. The determined values of gas and combustion air streams allowed for achieving the assumed charge temperature in the heating technology. Calculations of the impact of the excess combustion air ratio on process parameters were also carried out. It was found that no changes are required in the exhaust gas removal system, but verification of the fan supplying air to cool the exhaust gases before the recuperator is necessary. The amount of hydrogen required to fuel the continuous furnace also increases significantly (nearly threefold), which may also affect operating costs. At the same time, the emission of carbon dioxide into the atmosphere is completely reduced, which may be an important criterion when considering modernization options for heating furnaces in the metallurgical industry.

Keywords: hydrogen; combustion; renewable energy sources walking-beam furnace (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/17/18/4733/pdf (application/pdf)
https://www.mdpi.com/1996-1073/17/18/4733/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:17:y:2024:i:18:p:4733-:d:1483329

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().