Influence of Ti Layers on the Efficiency of Solar Cells and the Reduction of Heat Transfer in Building-Integrated Photovoltaics
Paweł Kwaśnicki (),
Dariusz Augustowski,
Agnieszka Generowicz () and
Anna Kochanek
Additional contact information
Paweł Kwaśnicki: Research & Development Centre for Photovoltaics, ML System S.A., Zaczernie 190G, 36-062 Zaczernie, Poland
Dariusz Augustowski: Research & Development Centre for Photovoltaics, ML System S.A., Zaczernie 190G, 36-062 Zaczernie, Poland
Agnieszka Generowicz: Department of Environmental Technologies, Cracow University of Technology, 31-155 Kraków, Poland
Anna Kochanek: Faculty of Engineering, State University of Applied Sciences in Nowy Sącz, 33-300 Nowy Sącz, Poland
Energies, 2024, vol. 17, issue 21, 1-13
Abstract:
This study examined the potential application of metallic coatings to mitigate the adverse effects of ultraviolet (UV) and infrared (IR) light on photovoltaic modules. Titanium coatings were applied on low-iron glass surfaces using magnetron sputtering at powers of 1000, 1250, 1500, 1750, 2000, and 2500 W. The module with uncoated glass served as a reference. The Ti layer thickness varied from 7 nm to 20 nm. Transmittance and reflectance spectra were used to calculate visible light transmittance L t , UV light transmittance L tuv , solar transmittance g , and visible light reflectance L r . The obtained parameters indicated that the thinnest Ti layer (1000 W) coating did not significantly affect light transmittance, but thicker layers did, altering the L t , g , and L r factors. However, every sample noticeably changed L tuv , probably due to the natural formation of a UV-reflective thin TiO 2 layer. The differences in fill factor ( FF ) were minimal, but thicker coatings resulted in lower open-circuit voltages ( U oc ) and short-circuit currents ( I sc ), leading to a reduction in power conversion efficiency ( PCE ). Notably, a Ti coating deposited at 2500 W reduced the power of the photovoltaic module by 78% compared to the uncoated sample but may protect modules against the unwanted effects of overheating.
Keywords: titanium coating; solar cell; physical vapour deposition; magnetron sputtering; photovoltaics; building-integrated photovoltaic; solar module (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2024
References: View references in EconPapers View complete reference list from CitEc
Citations:
Downloads: (external link)
https://www.mdpi.com/1996-1073/17/21/5327/pdf (application/pdf)
https://www.mdpi.com/1996-1073/17/21/5327/ (text/html)
Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.
Export reference: BibTeX
RIS (EndNote, ProCite, RefMan)
HTML/Text
Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:17:y:2024:i:21:p:5327-:d:1506955
Access Statistics for this article
Energies is currently edited by Ms. Agatha Cao
More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().