Integrating Metal–Organic Frameworks and Polyamide 12 for Advanced Hydrogen Storage Through Powder Bed Fusion

Chengming Shang, Yaan Liu, Oana Ghita, Noa Lachman, Dong Wang () and Mi Tian ()
Additional contact information
Chengming Shang: Department of Engineering, University of Exeter, Exeter EX4 4PY, UK
Yaan Liu: Department of Engineering, University of Exeter, Exeter EX4 4PY, UK
Oana Ghita: Department of Engineering, University of Exeter, Exeter EX4 4PY, UK
Noa Lachman: Department of Materials Science and Engineering, Tel Aviv University, Tel Aviv 6997801, Israel
Dong Wang: Department of Engineering, University of Exeter, Exeter EX4 4PY, UK
Mi Tian: Department of Engineering, University of Exeter, Exeter EX4 4PY, UK

Energies, 2024, vol. 17, issue 21, 1-21

Abstract: This paper introduces a pioneering approach that combines ex situ synthesis with advanced manufacturing to develop ZIF-67-PA12 Nylon composites with mixed-matrix membranes (MMMs), with the goal of enhancing hydrogen storage systems. One method involves producing MOF-PA12 composite powders through an in situ process, which is then commonly used as a base powder for powder bed fusion (PBF) to fabricate various structures. However, developing the in situ MOF-PA12 matrix presents challenges, including limited spreadability and processability at higher MOF contents, as well as reduced porosity due to pore blockage by polymers, ultimately diminishing hydrogen storage capacity. To overcome these issues, PBF is employed to form PA12 powder into films, followed by the ex situ direct synthesis of ZIF-67 onto these substrates at loadings exceeding those typically used in conventional MMM composites. In this study, ZIF-67 mass loadings ranging from 2 to 30 wt.% were synthesized on both PA12 powder and printed film substrates, with loadings on printed PA12 films extended up to 60 wt.%. ZIF-67-PA12-60(f) demonstrated a hydrogen capacity of 0.56 wt.% and achieved 1.53 wt.% for ZIF-67-PA12-30(p); in comparison, PA12 exhibited a capacity of 0.38 wt.%. This was undertaken to explore a range of ZIF-67 Metal–organic frameworks (MOFs) to assess their impact on the properties of the composite, particularly for hydrogen storage applications. Our results demonstrate that ex situ-synthesized ZIF-67-PA12 composite MMMs, which can be used as a final product for direct application and do not require the use of in situ pre-synthesized powder for the PBF process, not only retain significant hydrogen storage capacities, but also offer advantages in terms of repeatability, cost-efficiency, and ease of production. These findings highlight the potential of this innovative composite material as a practical and efficient solution for hydrogen storage, paving the way for advancements in energy storage technologies.

Keywords: metal–organic framework; powder bed fusion; 3D printing; mixed-matrix membrane; hydrogen storage (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/17/21/5430/pdf (application/pdf)
https://www.mdpi.com/1996-1073/17/21/5430/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:17:y:2024:i:21:p:5430-:d:1510578

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().