Optimizing Power Density in Partially Coated Cantilever Beam Energy Harvesters: A Cost-Effective Design Strategy

Md. Mohiuddin, Kazi Mostafijur Rahman, Zahir Ahmed and Riaz Ahmed ()
Additional contact information
Md. Mohiuddin: Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna 9203, Bangladesh
Kazi Mostafijur Rahman: Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna 9203, Bangladesh
Zahir Ahmed: Department of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna 9203, Bangladesh
Riaz Ahmed: Department of Mechanical Engineering, University of Wisconsin Green Bay, Green Bay, WI 54311, USA

Energies, 2024, vol. 17, issue 22, 1-20

Abstract: Cantilever beams with piezoelectric coating are the most widely used form of strain-driven energy harvesting. Almost all prior research on cantilever beam shapes aimed at enhancing energy output accounts for beams fully coated with piezoelectric materials. While a larger coating area, up to a certain limit, can enhance energy output, it also escalates the cost of the structure, as piezoelectric materials are very expensive. Output power density over the length of the beam/piezoelectric material varies significantly. Hence, a partially coated beam with an optimized positioning of piezoelectric material can not only cut the cost of the system but also warrant a higher output power density. On the other hand, optimizing the base beam shape always remains one of the top approaches to increasing the power output. As such, this work aims to select a cantilever beam design by investigating a wide variety of cantilever beam shapes while the beam is partially coated with the piezoelectric material to maximize the power output capacity of the harvester. In the first part of the study, an efficient size of the piezoelectric material and its placement in the host beam are selected based on the power capacity of the system. Next, the selected effective size and placement of the piezoelectric material is implemented in a wide range of cantilever beam shapes (e.g., trapezoidal, triangular, V-cut, concave, and convex) to select a host beam design for maximizing the output power density. To ascertain a comparable argument, the surface area, volume, and mass of all the considered beam shapes are kept consistent, as these parameters influence the power output of the harvester. The geometry of each shape is systematically varied to understand the effect of geometric configuration on the output power density. Additionally, an analysis is conducted to validate that the findings/selection of this study are independent of the thickness of the host beam or piezoelectric material.

Keywords: energy harvesting; cantilever beam; maximizing power output; resonance frequency; geometric configuration (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/17/22/5572/pdf (application/pdf)
https://www.mdpi.com/1996-1073/17/22/5572/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:17:y:2024:i:22:p:5572-:d:1516189

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().