Oxidative Liquefaction, an Approach for Complex Plastic Waste Stream Conversion into Valuable Oxygenated Chemicals

Hamza Mumtaz, Sebastian Werle, Roksana Muzyka, Szymon Sobek () and Marcin Sajdak ()
Additional contact information
Hamza Mumtaz: Department Thermal Technology, Silesian University of Technology, Stanisława Konarskiego 22, 44-100 Gliwice, Poland
Sebastian Werle: Department Thermal Technology, Silesian University of Technology, Stanisława Konarskiego 22, 44-100 Gliwice, Poland
Roksana Muzyka: Department of Air Protection, Silesian University of Technology, Stanisława Konarskiego 22B, 44-100 Gliwice, Poland
Szymon Sobek: Department of Heating, Ventilation and Dust Removal Technology, Silesian University of Technology, Stanisława Konarskiego 20, 44-100 Gliwice, Poland
Marcin Sajdak: Department of Air Protection, Silesian University of Technology, Stanisława Konarskiego 22B, 44-100 Gliwice, Poland

Energies, 2024, vol. 17, issue 5, 1-14

Abstract: Various waste streams including municipal solid waste (MSW), polymer waste from personal protective equipment (PPE) used in medical fields, and composite waste from wind turbine blades (WTBs) demand modern waste management and recycling approaches. Ultimate and proximate analysis of mentioned samples revealed a higher content of carbon—28.2 ± 8.0, 80.1 ± 2.3, and 50.3 ± 2.3, respectively—exhibiting sufficient potential to be converted into secondary carbon-based compounds. For this purpose, oxidative liquefaction of selected waste materials was carried out following a detailed experimental plan, a centred composite design for WTBs, and a central composite face-centred plan for MSW and PPEs. Temperature, pressure, oxidant concentration, reaction time, and waste-to-liquid ratio were the parameters of key interest, and their values were tested at a range of 200–350 °C, 20–40 bar, 15–60%, 30–90 min, and 3–25%, respectively, depending upon the type of waste. As a result, total polymer degradation (TPD) was recorded for three types of waste and the results were satisfactory, encouraging the decomposition of primary waste in liquid oxygenated chemical compounds (OCCs). Gas Chromatography with Flame Ionisation Detection (GC-FID) helped us quantify the number of OCCs for each waste sample. Energy consumption during the process was also recorded and optimisation of the experimental plan based on maximum TPD and OCCs yields against the minimum energy consumption was performed to make the process tech-economic.

Keywords: recycling; liquefaction; chromatographic studies; oxygenated chemical compounds; process optimisation; resin degradation; WTB; MSW; PPE (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2024
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/17/5/1086/pdf (application/pdf)
https://www.mdpi.com/1996-1073/17/5/1086/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:17:y:2024:i:5:p:1086-:d:1345187

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().