Study on the Design and Development of Advanced Inorganic Polymers for Thermal Energy Storage (TES) Systems

Ioanna Giannopoulou (), Loizos Georgiou, Konstantina Oikonomopoulou, Maria Spanou, Alexandros Michaelides and Demetris Nicolaides
Additional contact information
Ioanna Giannopoulou: Frederick Research Center, Nicosia 1035, Cyprus
Loizos Georgiou: RTD TALOS Ltd., Nicosia 2404, Cyprus
Konstantina Oikonomopoulou: Frederick Research Center, Nicosia 1035, Cyprus
Maria Spanou: Frederick Research Center, Nicosia 1035, Cyprus
Alexandros Michaelides: RTD TALOS Ltd., Nicosia 2404, Cyprus
Demetris Nicolaides: Frederick Research Center, Nicosia 1035, Cyprus

Energies, 2025, vol. 18, issue 12, 1-19

Abstract: Thermal Energy Storage (TES) technologies improve solar power dispatchability by addressing the important challenge of energy intermittency. Sensible heat energy storage technology using materials based on Ordinary Portland Cement (OPC) is the simplest and most economical. However, the operation of these materials is limited to temperatures below 400 °C due to the structural degradation of OPC at this temperature. This paper investigates the design and development of inorganic polymers based on Construction and Demolition Waste (CDW) as a sustainable, low-cost, and environmentally friendly alternative to OPC-based materials for high-temperature sensible TES applications. Based on the ternary systems Na 2 O-SiO 2 -Al 2 O 3 and K 2 O-SiO 2 -Al 2 O 3 , representative compositions of CDW-based inorganic polymers were theoretically designed and evaluated using the thermochemical software FactSage 7.0. The experimental verification of the theoretically designed inorganic polymers confirmed that they can withstand temperatures higher than 500 and up to 700 °C. The optimized materials developed compressive strength around 20 MPa, which was improved with temperatures up to 500 °C and then decreased. Moreover, they presented thermal capacities from 600 to 1090 J kg −1 °C −1 , thermal diffusivity in the range of 4.7–5.6 × 10 −7 m 2 s −1 , and thermal conductivity from 0.6 to 1 W m −1 °C −1 . These properties render the developed inorganic polymers significant candidates for TES applications.

Keywords: inorganic polymer; geopolymer; thermal energy storage; thermodynamics; ternary oxide system; elevated temperatures; structural stability; thermal conductivity (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2025
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1996-1073/18/12/3107/pdf (application/pdf)
https://www.mdpi.com/1996-1073/18/12/3107/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:18:y:2025:i:12:p:3107-:d:1677739

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().