Pyrolysis of Municipal Green Waste: A Modelling, Simulation and Experimental Analysis

Mohammed J. Kabir, Ashfaque Ahmed Chowdhury and Mohammad G. Rasul
Additional contact information
Mohammed J. Kabir: School of Engineering, Faculty of Science, Engineering and Built Environment, Deakin University, Victoria 3220, Australia
Ashfaque Ahmed Chowdhury: School of Engineering and Technology, Gladstone Engineering Centre, Higher Education Division, Central Queensland University, Gladstone, Queensland 4680, Australia
Mohammad G. Rasul: School of Engineering and Technology, Higher Education Division, Central Queensland University, Rockhampton, Queensland 4702, Australia

Energies, 2015, vol. 8, issue 8, 1-20

Abstract: Pyrolysis is the thermo-chemical conversion of carbonaceous feedstock in the absence of oxygen to produce bio-fuel (bio-oil, bio-char and syn-gas). Bio-fuel production from municipal green waste (MGW) through the pyrolysis process has attracted considerable attention recently in the renewable energy sector because it can reduce greenhouse gas emissions and contribute to energy security. This study analyses properties of MGW feedstock available in Rockhampton city of Central Queensland, Australia, and presents an experimental investigation of producing bio-fuel from that MGW through the pyrolysis process using a short sealed rotary furnace. It was found from the experiment that about 19.97% bio-oil, 40.83% bio-char and 29.77% syn-gas can be produced from the MGW. Then, a four-stage steady state simulation model is developed for pyrolysis process performance simulation using Aspen Plus software. In the first stage, the moisture content of the MGW feed is reduced. In the second stage, the MGW is decomposed according to its elemental constituents. In the third stage, condensate material is separated and, finally, the pyrolysis reactions are modelled using the Gibbs free energy minimisation approach. The MGW’s ultimate and proximate analysis data were used in the Aspen Plus simulation as input parameters. The model is validated with experimentally measured data. A good agreement between simulation and experimental results was found. More specifically, the variation of modelling and experimental elemental compositions of the MGW was found to be 7.3% for carbon, 15.82% for hydrogen, 7.04% for nitrogen and 5.56% for sulphur. The validated model is used to optimise the biofuel production from the MGW as a function of operating variables such as temperature, moisture content, particle size and process heat air–fuel ratio. The modelling and optimisation results are presented, analysed and discussed.

Keywords: municipal green waste; pyrolysis; Aspen Plus simulation; energy balance (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2015
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (14)

Downloads: (external link)
https://www.mdpi.com/1996-1073/8/8/7522/pdf (application/pdf)
https://www.mdpi.com/1996-1073/8/8/7522/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:8:y:2015:i:8:p:7522-7541:d:53100

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().