Determination of Polycyclic Aromatic Hydrocarbons in Sludge from Water and Wastewater Treatment Plants by GC-MS

Chih-Feng Chen, Yun-Ru Ju, Yee Cheng Lim, Shu-Ling Hsieh, Mei-Ling Tsai, Pei-Pei Sun, Ravi Katiyar, Chiu-Wen Chen and Cheng-Di Dong
Additional contact information
Chih-Feng Chen: Department of Marine Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Yun-Ru Ju: Department of Marine Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Yee Cheng Lim: Department of Marine Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Shu-Ling Hsieh: Department of Seafood Science, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Mei-Ling Tsai: Department of Seafood Science, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Pei-Pei Sun: Department of Seafood Science, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Ravi Katiyar: Department of Marine Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Chiu-Wen Chen: Department of Marine Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan
Cheng-Di Dong: Department of Marine Environmental Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 81157, Taiwan

IJERPH, 2019, vol. 16, issue 14, 1-13

Abstract: The qualitative and quantitative analysis of 16 polycyclic aromatic hydrocarbons (PAHs) in sludge samples from drinking water treatment plants (DWTP) and wastewater treatment plants (WWTP) were established using gas chromatography–mass spectrometry (GC-MS). The method was suitable to quantify PAHs in the sludge of DWTP and WWTP and it was confirmed by the relevant quality assurance/quality control (QA/QC) procedures. The recovery of individual PAHs in the spiked samples ranged from 74.3% to 108.7%. Detection limits of the analytical procedure were 0.0010–0.0046 mg/kg dw for individual PAHs. This method was used to determine the concentration of PAHs in the selected two DWTP and four WWTP sludge samples. The results showed that the total PAHs (∑PAHs) were in low levels which ranged from 0.0668 to 0.1357 mg/kg dw, and 0.5342–1.0666 mg/kg dw for DWTP and WWTP respectively. The 3- & 4-ring PAHs were predominant in DWTP sludge, ranging from 77.4% to 82.7%; the 4-ring PAHs were predominant in WWTP sludge, ranging from 40.7% to 47.6%. The PAHs of DWTP sludge are mainly composed of 3-ring phenanthrene and anthracene and 4-ring pyrene, and chrysene. The PAHs of WWTP sludge are dominated by 4-ring fluoranthene, pyrene, and chrysene. The detected PAHs concentration should be undoubtedly considered for agriculture in sludge applications based on the limits of the EU regulations. The results of this study can be used for regular monitoring to establish a reference for sludge management and application to agriculture.

Keywords: PAHs; GC-MS; sludge; drinking water treatment plants (DWTP); wastewater treatment plants (WWTP) (search for similar items in EconPapers)
JEL-codes: I I1 I3 Q Q5 (search for similar items in EconPapers)
Date: 2019
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1660-4601/16/14/2604/pdf (application/pdf)
https://www.mdpi.com/1660-4601/16/14/2604/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jijerp:v:16:y:2019:i:14:p:2604-:d:250553

Access Statistics for this article

IJERPH is currently edited by Ms. Jenna Liu

More articles in IJERPH from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().