Analysis and Optimization of Mn Removal from Contaminated Solid Matrixes by Electrokinetic Remediation

Claudio Cameselle, Susana Gouveia and Adrian Cabo
Additional contact information
Claudio Cameselle: BiotecnIA, Chemical Engineering, University of Vigo, Rua Maxwell s/n, Building Fundicion, 36310 Vigo, Spain
Susana Gouveia: BiotecnIA, Chemical Engineering, University of Vigo, Rua Maxwell s/n, Building Fundicion, 36310 Vigo, Spain
Adrian Cabo: BiotecnIA, Chemical Engineering, University of Vigo, Rua Maxwell s/n, Building Fundicion, 36310 Vigo, Spain

IJERPH, 2020, vol. 17, issue 6, 1-16

Abstract: Electrokinetic remediation is a useful technique for the removal of ionic contaminants in soils, sediments, sludges, and other solid porous matrixes. The efficiency of metal removal and the electricity consumption in the electrokinetic treatment of soils largely depend on electric and physicochemical conditions. This study analyzes the electrokinetic treatment of Mn contaminated kaolinite clay specimen and the influence of voltage, current intensity, moisture content, pH, and facilitating agents on metal removal and energy consumption. The objective of this study is to identify the influence of the typical variables used in electrokinetic remediation. The results showed that the operation at constant voltage or constant current intensity were equivalent in terms of metal removal and energy consumption, as long as the electric field intensity was kept low to minimize the consumption in parallel electrochemical reactions, especially the electrolysis of water. The moisture content had a significant influence on the Mn removal. Moisture content higher that 50 percent resulted in very effective Mn removal as compared with kaolinite specimens with lower moisture. The control of pH in the electrolyte solutions and the addition of facilitating agents (organic acids) enhanced the removal of Mn but increased the electric energy cost. Overall, the best conditions for Mn removal involved low to moderate electric potential difference (10 to 30 V), the use of citric acid as the facilitating agent, and the pH control in the cathode at a slightly acid pH. The electrokinetic treatment of a sludge from a water treatment plant contaminated with Mn was effective when pH control on the cathode was used. Mn and various metals (66% of Mn, 30% of Cu, 56% of Zn, 21% Sr, and 21% of Fe) were removed with moderate electricity and acid consumption.

Keywords: electrokinetic remediation; manganese; pH control; citric acid; kaolinite; sludge (search for similar items in EconPapers)
JEL-codes: I I1 I3 Q Q5 (search for similar items in EconPapers)
Date: 2020
References: View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/1660-4601/17/6/1820/pdf (application/pdf)
https://www.mdpi.com/1660-4601/17/6/1820/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jijerp:v:17:y:2020:i:6:p:1820-:d:331243

Access Statistics for this article

IJERPH is currently edited by Ms. Jenna Liu

More articles in IJERPH from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().