Manufacturing and Application of 3D Printed Photo Fenton Reactors for Wastewater Treatment

Kourosh Nasr Esfahani, Mohammad Damous Zandi, J. Antonio Travieso-Rodriguez, Moisès Graells and Montserrat Pérez-Moya
Additional contact information
Kourosh Nasr Esfahani: Chemical Engineering Department, Campus Diagonal-Besòs, Universitat Politècnica de Catalunya, Av. Eduard Maristany, 16, 08019 Barcelona, Spain
Mohammad Damous Zandi: Mechanical Engineering Department, Campus Diagonal-Besòs, Universitat Politècnica de Catalunya, Av. Eduard Maristany, 16, 08019 Barcelona, Spain
J. Antonio Travieso-Rodriguez: Mechanical Engineering Department, Campus Diagonal-Besòs, Universitat Politècnica de Catalunya, Av. Eduard Maristany, 16, 08019 Barcelona, Spain
Moisès Graells: Chemical Engineering Department, Campus Diagonal-Besòs, Universitat Politècnica de Catalunya, Av. Eduard Maristany, 16, 08019 Barcelona, Spain
Montserrat Pérez-Moya: Chemical Engineering Department, Campus Diagonal-Besòs, Universitat Politècnica de Catalunya, Av. Eduard Maristany, 16, 08019 Barcelona, Spain

IJERPH, 2021, vol. 18, issue 9, 1-18

Abstract: Additive manufacturing (AM) or 3D printing offers a new paradigm for designing and developing chemical reactors, in particular, prototypes. The use of 3D printers has been increasing, their performance has been improving, and their price has been reducing. While the general trend is clear, particular applications need to be assessed for their practicality. This study develops and follows a systematic approach to the prototyping of Advanced Oxidation Processes (AOP) reactors. Specifically, this work evaluates and discusses different printable materials in terms of mechanical and chemical resistance to photo-Fenton reactants. Metallic and ceramic materials are shown to be impracticable due to their high printing cost. Polymeric and composite materials are sieved according to criteria such as biodegradability, chemical, thermal, and mechanical resistance. Finally, 3D-printed prototypes are produced and tested in terms of leakage and resistance to the photo-Fenton reacting environment. Polylactic acid (PLA) and wood–PLA composite (Timberfill ® ) were selected, and lab-scale raceway pond reactors (RPR) were printed accordingly. They were next exposed to H 2 O 2 /Fe(II) solutions at pH = 3 ± 0.2 and UV radiation. After 48 h reaction tests, results revealed that the Timberfill ® reactor produced higher Total Organic Carbon (TOC) concentrations (9.6 mg·L ?1 ) than that obtained for the PLA reactor (5.5 mg·L ?1 ) and Pyrex ® reactor (5.2 mg·L ?1 ), which suggests the interference of Timberfill ® with the reaction. The work also considers and discusses further chemical and mechanical criteria that also favor PLA for 3D-printing Fenton and photo-Fenton reactors. Finally, the work also provides a detailed explanation of the printing parameters used and guidelines for preparing prototypes.

Keywords: photo-Fenton; wastewater treatment; PLA; Timberfill ®; 3D printing; raceway pond (search for similar items in EconPapers)
JEL-codes: I I1 I3 Q Q5 (search for similar items in EconPapers)
Date: 2021
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1660-4601/18/9/4885/pdf (application/pdf)
https://www.mdpi.com/1660-4601/18/9/4885/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jijerp:v:18:y:2021:i:9:p:4885-:d:548572

Access Statistics for this article

IJERPH is currently edited by Ms. Jenna Liu

More articles in IJERPH from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().