Electrochemical Mechanisms and Optimization System of Nitrate Removal from Groundwater by Polymetallic Nanoelectrodes

Fang Liu (), Zhili Zhang and Jindun Xu
Additional contact information
Fang Liu: Institute of Transportation, Inner Mongolia University, Hohhot 010070, China
Zhili Zhang: Institute of Transportation, Inner Mongolia University, Hohhot 010070, China
Jindun Xu: Institute of Transportation, Inner Mongolia University, Hohhot 010070, China

IJERPH, 2023, vol. 20, issue 3, 1-17

Abstract: Zn-Cu-TiO 2 polymetallic nanoelectrodes were developed using Ti electrodes as the substrate. The reaction performance and pollutant removal mechanism of the electrodes were studied for different technological conditions by analyzing the electrochemical properties of the electrodes in the electrochemical system, using Ti, TiO 2 , Cu-TiO 2 , and Zn-Cu-TiO 2 electrodes as cathodes and Pt as the anode. The Tafel curve was used for measuring the corrosion rate of the electrode. The Tafel curve resistance of the Zn-Cu-TiO 2 polymetallic nanoelectrode was the smallest, so the Zn-Cu-TiO 2 nanoelectrode was the least prone to corrosion. The electrode reaction parameters were determined using cyclic voltammetry (CV). Zn-Cu-TiO 2 polymetallic nanoelectrodes have the lowest peak position and the highest electrochemical activity. The surface area of the electrode was determined by the time-current (CA) method, and it was found that the Zn-Cu-TiO 2 polymetallic nanoelectrode had a larger surface area and the highest removal rate of nitrate. The Ti, TiO 2 , Cu-TiO 2 , and Zn-Cu-TiO 2 electrodes also had higher removal rates for real groundwater, and the differences between the removal rates of nitrates for deionized water and real groundwater decreased as removal time increased. The Zn-Cu-TiO 2 polymetallic nanoelectrode exhibited the highest removal rate for real groundwater. This study reveals the reaction mechanism of the cathode reduction of nitrate, which provides the basis for constructing electrochemical reactors and its application in treating nitrate-contaminated groundwater. A mathematical model of optimized working conditions was created by the response surface method, and optimum time, NaCl concentration, and current density were 93.39 min, 0.22 g/L, and 38.34 mA/cm 2 , respectively. Under these optimal conditions, the nitration removal rate and ammonium nitrogen generation in the process solution were 100% and 0.00 mg/L, respectively.

Keywords: nanoelectrode; electrochemical workstation; reaction mechanism; electrochemical performance; optimization (search for similar items in EconPapers)
JEL-codes: I I1 I3 Q Q5 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/1660-4601/20/3/1923/pdf (application/pdf)
https://www.mdpi.com/1660-4601/20/3/1923/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jijerp:v:20:y:2023:i:3:p:1923-:d:1042174

Access Statistics for this article

IJERPH is currently edited by Ms. Jenna Liu

More articles in IJERPH from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().