Process Modeling, Optimization and Cost Analysis of a Sulfur Recovery Unit by Applying Pinch Analysis on the Claus Process in a Gas Processing Plant

Muhammad Arslan Zahid, Muhammad Ahsan, Iftikhar Ahmad and Muhammad Nouman Aslam Khan
Additional contact information
Muhammad Arslan Zahid: School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan
Muhammad Ahsan: School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan
Iftikhar Ahmad: School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan
Muhammad Nouman Aslam Khan: School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan

Mathematics, 2021, vol. 10, issue 1, 1-18

Abstract: The Claus process is one of the promising technologies for acid gas processing and sulfur recovery. Hydrogen sulfide primarily exists as a byproduct in the gas processing unit. It must be removed from natural gas. The Environmental Protection Agency (EPA) notices that increasing SO 2 and CO 2 in the air harms the environment. Sulfur generally has an elemental content of 0.1–6 wt % in crude oil, but the value could be higher than 14% for some crude oils and asphalts. It produces SO 2 and CO 2 gases, which damage the environment and atmosphere of the earth, called primary pollutants. When SO 2 gas is reacted with water in the atmosphere, it causes sulphur and nitric acid, called a secondary pollutant. The world countries started desulphurization in 1962 to reduce the amount of sulfur in petroleum products. In this research, the Claus process was modeled in Aspen Plus software (AspenTech, Bedford, MA, USA) and industrial data validated it. The Peng–Robinson method is used for the simulation of hydrocarbon components. The influence of oxygen gas concentration, furnace temperature, the temperature of the first catalytic reactor, and temperature of the second catalytic reactor on the Claus process were studied. The first objective of the research is process modeling and simulation of a chemical process. The second objective is optimizing the process. The optimization tool in the Aspen Plus is used to obtain the best operating parameters. The optimization results show that sulfur recovery increased to 18%. Parametric analysis is studied regarding operating parameters and design parameters for increased production of sulfur. Due to pinch analysis on the Claus process, the operating cost of the heat exchangers is reduced to 40%. The third objective is the cost analysis of the process. Before optimization, it is shown that the production of sulfur recovery increased. In addition, the recovery of sulfur from hydrogen sulfide gas also increased. After optimizing the process, it is shown that the cost of heating and cooling utilities is reduced. In addition, the size of equipment is reduced. The optimization causes 2.5% of the profit on cost analysis.

Keywords: optimization; simulation; Claus process; Aspen Plus; sulfur recapture; pinch analysis (search for similar items in EconPapers)
JEL-codes: C (search for similar items in EconPapers)
Date: 2021
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2227-7390/10/1/88/pdf (application/pdf)
https://www.mdpi.com/2227-7390/10/1/88/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jmathe:v:10:y:2021:i:1:p:88-:d:712051

Access Statistics for this article

Mathematics is currently edited by Ms. Emma He

More articles in Mathematics from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().