Damage Effects and Fractal Characteristics of Coal Pore Structure during Liquid CO2 Injection into a Coal Bed for E-CBM

Li Ma, Gaoming Wei, Zhenbao Li, Qiuhong Wang and Weifeng Wang
Additional contact information
Li Ma: College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an 710054, China
Gaoming Wei: College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an 710054, China
Zhenbao Li: College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an 710054, China
Qiuhong Wang: College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an 710054, China
Weifeng Wang: College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an 710054, China

Resources, 2018, vol. 7, issue 2, 1-17

Abstract: Pore structure has a significant influence on coal-bed methane (CBM) enhancement. Injecting liquid CO 2 into coal seams is an effective way to increase CBM recovery. However, there has been insufficient research regarding the damage effects and fractal characteristics of pore structure at low temperature induced by injecting liquid CO 2 into coal samples. Therefore, the methods of low-pressure nitrogen adsorption-desorption (LP-N 2 -Ad) and mercury intrusion porosimetry (MIP) were used to investigate the damage effects and fractal characteristics of pore structure with full aperture as the specimens were frozen by liquid CO 2 . The adsorption isotherms revealed that the tested coal samples belonged to type B, indicating that they contained many bottle and narrow-slit shaped pores. The average pore diameter (APD; average growth rate of 18.20%), specific surface area (SSA; average growth rate of 7.38%), and total pore volume (TPV; average growth rate of 18.26%) increased after the specimens were infiltrated by liquid CO 2 , which indicated the generation of new pores and the transformation of original pores. Fractal dimensions D 1 (average of 2.58) and D 2 (average of 2.90) of treated coal samples were both larger the raw coal (D 1 , average of 2.55 and D 2 , average of 2.87), which indicated that the treated specimens had more rough pore surfaces and complex internal pore structures than the raw coal samples. The seepage capacity was increased because D 4 (average of 2.91) of the treated specimens was also higher than the raw specimens (D 4 , average of 2.86). The grey relational coefficient between the fractal dimension and pore structure parameters demonstrated that the SSA, APD, and porosity positively influenced the fractal features of the coal samples, whereas the TPV and permeability exerted negative influences.

Keywords: coal-bed methane recovery; liquid carbon dioxide; pore structure evolution; fractal characteristic; grey relational theory (search for similar items in EconPapers)
JEL-codes: Q1 Q2 Q3 Q4 Q5 (search for similar items in EconPapers)
Date: 2018
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/2079-9276/7/2/30/pdf (application/pdf)
https://www.mdpi.com/2079-9276/7/2/30/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jresou:v:7:y:2018:i:2:p:30-:d:144343

Access Statistics for this article

Resources is currently edited by Ms. Donchian Ma

More articles in Resources from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().