The Effect of Weighting Materials on Oil-Well Cement Properties While Drilling Deep Wells

Abdulmalek Ahmed, Ahmed Abdulhamid Mahmoud, Salaheldin Elkatatny and Weiqing Chen
Additional contact information
Abdulmalek Ahmed: College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia
Ahmed Abdulhamid Mahmoud: College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia
Salaheldin Elkatatny: College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia
Weiqing Chen: College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia

Sustainability, 2019, vol. 11, issue 23, 1-12

Abstract: In deep hydrocarbon development wells, cement slurry with high density is required to effectively balance the high-pressure formations. The increase in the slurry density could be achieved by adding different heavy materials. In this study, the effect of the weighting materials (barite, hematite, and ilmenite) on the properties of Saudi Class G cement matrix of vertical homogeneity, compressive strength, porosity, and permeability was evaluated. Three cement slurries were weighted with barite, hematite, and ilmenite, and cured at 294 °F and 3000 psi for 24 h. All slurries have the same concentration of the different additives except the weighting material. The amount of weighting material used in every slurry was determined based on the targeted density of 18 lbm/gal. The results of this study revealed that the most vertically homogenous cement matrix was the ilmenite-weighted sample with a vertical variation of 17.6% compared to 20.2 and 24.8% for hematite- and barite-weighted cement, respectively. This is attributed to the small particle size of the ilmenite. The medical computerized tomography (CT) scan confirmed that the ilmenite-weighted sample is the most homogeneous, with a narrow range of density variation vertically along the sample. Hematite-weighted cement showed the highest compressive strength of 55.3 MPa, and the barite- and ilmenite-weighted cement compressive strengths are each 18.4 and 36.7% less than the compressive strength of the hematite-weighted cement, respectively. Barite-weighted cement has the lowest porosity and permeability of 6.1% and 18.9 mD, respectively. The maximum particle size of ilmenite used in this study is less than 42 μm to ensure no abrasion effect on the drilling system, and it minimized the solids segregation while maintaining a compressive strength that is higher than the minimum acceptable strength, which is the recommended weighting material for Saudi Class G cement.

Keywords: oil-well cement; cement weighting material; barite; hematite; ilmenite; HPHT wells (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2019
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (4)

Downloads: (external link)
https://www.mdpi.com/2071-1050/11/23/6776/pdf (application/pdf)
https://www.mdpi.com/2071-1050/11/23/6776/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:11:y:2019:i:23:p:6776-:d:292238

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().