EconPapers    
Economics at your fingertips  
 

The Geomechanical and Fault Activation Modeling during CO 2 Injection into Deep Minjur Reservoir, Eastern Saudi Arabia

Sikandar Khan, Yehia Khulief, Abdullatif Al-Shuhail, Salem Bashmal and Naveed Iqbal
Additional contact information
Sikandar Khan: Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
Yehia Khulief: Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
Abdullatif Al-Shuhail: Department of Geosciences, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
Salem Bashmal: Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
Naveed Iqbal: Department of Electrical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia

Sustainability, 2020, vol. 12, issue 23, 1-17

Abstract: The release of large quantities of CO 2 into the atmosphere is one of the major causes of global warming. The most viable method to control the level of CO 2 in the atmosphere is to capture and permanently sequestrate the excess amount of CO 2 in subsurface geological reservoirs. The injection of CO 2 gives rise to pore pressure buildup. It is crucial to monitor the rising pore pressure in order to prevent the potential failure of the reservoir and the subsequent leakage of the stored CO 2 into the overburden layers, and then back to the atmosphere. In this paper, the Minjur sandstone reservoir in eastern Saudi Arabia was considered for establishing a coupled geomechanical model and performing the corresponding stability analysis. During the geomechanical modeling process, the fault passing through the Minjur and Marrat layers was also considered. The injection-induced pore-pressure and ground uplift profiles were calculated for the case of absence of a fault across the reservoir, as well as the case with a fault. The stability analysis was performed using the Mohr–Coulomb failure criterion. In the current study, the excessive increase in pore pressure, in the absence of geological faults, moved the reservoir closer to the failure envelope, but in the presence of geological faults, the reservoir reached to the failure envelope and the faults were activated. The developed geomechanical model provided estimates for the safe injection parameters of CO 2 based on the magnitudes of the reservoir pore pressure and stresses in the reservoir.

Keywords: geomechanical modeling; CO 2 leakage; global warming; CO 2 storage; fault activation (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2020
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
https://www.mdpi.com/2071-1050/12/23/9800/pdf (application/pdf)
https://www.mdpi.com/2071-1050/12/23/9800/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:12:y:2020:i:23:p:9800-:d:450135

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().

 
Page updated 2025-03-19
Handle: RePEc:gam:jsusta:v:12:y:2020:i:23:p:9800-:d:450135