The Optimisation Analysis of Sand-Clay Mixtures Stabilised with Xanthan Gum Biopolymers

Jing Ni, Gang-Lai Hao, Jia-Qi Chen, Lei Ma and Xue-Yu Geng
Additional contact information
Jing Ni: Department of Civil Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
Gang-Lai Hao: Department of Civil Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
Jia-Qi Chen: Department of Civil Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
Lei Ma: Department of Civil Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
Xue-Yu Geng: School of Engineering, University of Warwick, Coventry CV4 7AL, UK

Sustainability, 2021, vol. 13, issue 7, 1-17

Abstract: Sand–clay mixtures can be encountered in both natural soils (e.g., residual soils, clay deposits and clinosols) and artificial fills. The method of utilising biopolymers in ground improvement for sand–clay mixtures has emerged recently. However, a full understanding of the strengthening effect of biopolymer-treated sand–clay mixtures has not yet been achieved due to a limited number of relevant studies. In this study, xanthan gum (XG), as one of the eco-friendly biopolymers, was used to treat reconstituted sand–clay mixtures that had various compositions in related to clay (or sand) content and clay type (kaolin and bentonite). A series of laboratory unconfined compression strength (UCS) tests were conducted to probe the performances of XG-treated sand–clay mixtures from two aspects, i.e., optimum treatment conditions (e.g., XG content and initial moisture content) to achieve the maximum strengthening effect and strengthening efficiency for the sand–clay mixtures with different compositions. The experimental results indicated that the optimum initial moisture content decreased as the sand content increased. The optimum XG content, which also decreased with the increasing sand content, remained approximately 3.75% for all sand–kaolin mixtures and 5.75% for all sand–bentonite mixtures if calculated based on clay fraction. While untreated sand–kaolin mixtures and sand–bentonite mixtures had comparable UCS values, XG-treated sand–kaolin mixtures seemed to have better improved mechanical strength due to higher ionic (or hydrogen) bonds with XG and low-swelling properties compared with bentonite. The deformation modulus of XG-treated sand–clay mixtures were positively related with UCS. The variation in UCS and stiffness for each treatment condition increased as the sand content was elevated for both sand-kaolin and sand-bentonite mixtures. An increment in the proportion of the heterogeneous composite formed by irregular sand particles conglomerated with the XG–clay matrix in total soil might be responsible for this phenomenon.

Keywords: xanthan gum; sand-clay mixture; bentonite; kaolin; uniaxial compressive strength tests; initial moisture content; biopolymer content (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2021
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2071-1050/13/7/3732/pdf (application/pdf)
https://www.mdpi.com/2071-1050/13/7/3732/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:13:y:2021:i:7:p:3732-:d:525049

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().