Metal Rod Surfaces after Exposure to Used Cooking Oils

Nina Bruun, Juho Lehmusto, Jarl Hemming, Fiseha Tesfaye and Leena Hupa
Additional contact information
Nina Bruun: Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Henrikinkatu 2, FI-20500 Turku, Finland
Juho Lehmusto: Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Henrikinkatu 2, FI-20500 Turku, Finland
Jarl Hemming: Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Henrikinkatu 2, FI-20500 Turku, Finland
Fiseha Tesfaye: Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Henrikinkatu 2, FI-20500 Turku, Finland
Leena Hupa: Johan Gadolin Process Chemistry Centre, Åbo Akademi University, Henrikinkatu 2, FI-20500 Turku, Finland

Sustainability, 2021, vol. 14, issue 1, 1-14

Abstract: Used cooking oils (UCOs) have a high potential as renewable fuels for the maritime shipping industry. However, their corrosiveness during storage and usage are some of the concerns yet to be investigated for addressing compatibility issues. Thus, the corrosion of steels and copper exposed to the UCOs was studied through the immersion of metal rods for different periods. The changes on the rod surfaces were analyzed with a scanning electron microscope (SEM). After the immersion, the copper concentration dissolved in the bio-oils was measured using inductively coupled plasma-optical emission spectrometry (ICP-OES). The free fatty acids and glycerides were analyzed using gas chromatography with flame ionization detection (GC-FID). The acid number (AN), water concentration, as well as density and kinematic viscosity of the bio-oils were determined with standard methods. The UCOs with the highest water content were corrosive, while the oils with lower water concentrations but higher ANs induced lower corrosion. After mixing two different UCOs, the metal corrosion decreased with an increasing concentration of the oil with lower corrosive properties. The lower corrosion properties were most likely due to the monounsaturated fatty acids, e.g., oleic acid in oils. These acids formed a barrier layer on the rod surfaces, thereby inhibiting the permeation of oxygen and water to the surface. Even adding 0.025 wt% of tert-butylamine decreased the corrosivity of UCO against polished steel rod. The results suggested that mixing several oil batches and adding a suitable inhibitor reduces the potential corrosive properties of UCOs.

Keywords: corrosion; inhibitor; used cooking oil; renewable energy sources (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2021
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2071-1050/14/1/355/pdf (application/pdf)
https://www.mdpi.com/2071-1050/14/1/355/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:14:y:2021:i:1:p:355-:d:713885

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().