Applications of Hydrochar and Charcoal in the Iron and Steelmaking Industry—Part 1: Characterization of Carbonaceous Materials

Yuchiao Lu, Hanmin Yang, Andrey V. Karasev, Chuan Wang and Pär G. Jönsson
Additional contact information
Yuchiao Lu: Material Science and Engineering, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden
Hanmin Yang: Material Science and Engineering, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden
Andrey V. Karasev: Material Science and Engineering, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden
Chuan Wang: Process Metallurgy, Swerim AB, SE-971 25 Luleå, Sweden
Pär G. Jönsson: Material Science and Engineering, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden

Sustainability, 2022, vol. 14, issue 15, 1-27

Abstract: The iron and steelmaking industry faces the dilemma of the need to decrease their greenhouse gas emissions to align with decarbonization goals, while at the same time fulfill the increasing steel demand from the growing population. Replacing fossil coal and coke with biomass-based carbon materials reduces the net carbon dioxide emissions. However, there is currently a shortage of charcoal to fully cover the demand from the iron and steelmaking industry to achieve the emission-reduction goals. Moreover, the transportation and energy sectors can compete for biofuel usage in the next few decades. Simultaneously, our society faces challenges of accumulation of wastes, especially wet organic wastes that are currently not reused and recycled to their full potentials. Here, hydrothermal carbonization is a technology which can convert organic feedstocks with high moisture contents to solid fuels (hydrochar, one type of biochar) as an alternative renewable carbon material. This work studied the differences between a hydrochar, produced from lemon peels (Lemon Hydrochar), and two types of charcoals (with and without densification) and an Anthracite coal. Characterizations such as chemical and ash compositions, thermogravimetric analyses in nitrogen and carbon dioxide atmospheres, scanning electron microscope analyses of carbon surface morphologies, and pyrolysis up to 1200 °C were performed. The main conclusions from this study are the following: (1) hydrochar has a lower thermal stability and a higher reactivity compared to charcoal and Anthracite; (2) densification resulted in a reduction of the moisture pickup and CO 2 reactivity of charcoal; (3) pyrolysis of Lemon Hydrochar resulted in the formation of a large amount of tar (17 wt%) and gas (39 wt%), leading to its low fixed carbon content (27 wt%); (4) a pyrolyzed hydrochar (up to 1200 °C) has a comparable higher heating value to those of charcoal and Anthracite, but its phosphorous, ash, and alkalis contents increased significantly; (5) based on the preliminary assessment, hydrochar should be blended with charcoal or Anthracite, or be upgraded through slow pyrolysis to fulfill the basic functions of carbon in the high-temperature metallurgical processes.

Keywords: greenhouse gas emissions; biomass; charcoal; hydrothermal carbonization; hydrochar; low CO 2 steelmaking (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
https://www.mdpi.com/2071-1050/14/15/9488/pdf (application/pdf)
https://www.mdpi.com/2071-1050/14/15/9488/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:14:y:2022:i:15:p:9488-:d:878547

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().