Investigations of Performance of Mini-Channel Condensers and Evaporators for Propane

Dariusz Butrymowicz (), Kamil Śmierciew, Jerzy Gagan, Adam Dudar, Michał Łukaszuk, Huiming Zou and Adam Łapiński
Additional contact information
Dariusz Butrymowicz: Faculty of Mechanical Engineering, Białystok University of Technology, 15-351 Bialystok, Poland
Kamil Śmierciew: Faculty of Mechanical Engineering, Białystok University of Technology, 15-351 Bialystok, Poland
Jerzy Gagan: Faculty of Mechanical Engineering, Białystok University of Technology, 15-351 Bialystok, Poland
Adam Dudar: Faculty of Mechanical Engineering, Białystok University of Technology, 15-351 Bialystok, Poland
Michał Łukaszuk: Faculty of Mechanical Engineering, Białystok University of Technology, 15-351 Bialystok, Poland
Huiming Zou: Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100045, China
Adam Łapiński: Faculty of Mechanical Engineering, Białystok University of Technology, 15-351 Bialystok, Poland

Sustainability, 2022, vol. 14, issue 21, 1-17

Abstract: This paper provides the results of experimental investigations of the exemplary mini-channel heat exchanger in its application as a condenser and an evaporator in a compressor refrigeration system with propane as a working fluid. The aim of the investigations was to identify the mean heat transfer coefficient of the refrigerant side for the entire operating range of the tested heat exchanger. The experiments covered a mass velocity range from 50 to 160 kg/(m 2 × s). The experiments covered a range of liquid subcooling in the condenser from 3 to 15 K and a range of vapour superheating at the outlet of the evaporator from 3 up to 15 K. The experiments on the condenser were conducted at the saturation temperature of 34 °C, and in the case of the evaporator, at the saturation temperature of 8 °C. The average heat transfer coefficients as well as pressure drops in the case of the operation of the tested heat exchanger as an evaporator and condenser were calculated. The heat transfer coefficient was calculated by means of the separated thermal resistance method with the application of the Wilson plot technique. The experiments confirmed the increase in the heat transfer coefficient with the increase in the refrigerant mass flow rate for the tested mini-channel heat exchanger. A dimensionless correlation was proposed for the pressure drop based on the modified Müller-Steinhagen correlation in the case of the operation of the mini-channel heat exchanger as a condenser and as an evaporator.

Keywords: mini-channel heat exchangers; condensers; evaporators; heat transfer; pressure drop; propane (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2022
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2071-1050/14/21/14249/pdf (application/pdf)
https://www.mdpi.com/2071-1050/14/21/14249/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:14:y:2022:i:21:p:14249-:d:959791

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().