Sustainable Management Strategy for Solidification/Stabilization of Zinc Plant Residues (ZPR) by Fly Ash/Clay-Based Geopolymers

Juan Dacuba, Tamara Llano, Eva Cifrian and Ana Andrés
Additional contact information
Juan Dacuba: Department of Chemistry and Process and Resource Engineering, ETSIIT, University of Cantabria, Avda. Los Castros s/n, 39005 Santander, Spain
Tamara Llano: Department of Chemistry and Process and Resource Engineering, ETSIIT, University of Cantabria, Avda. Los Castros s/n, 39005 Santander, Spain
Eva Cifrian: Department of Chemistry and Process and Resource Engineering, ETSIIT, University of Cantabria, Avda. Los Castros s/n, 39005 Santander, Spain
Ana Andrés: Department of Chemistry and Process and Resource Engineering, ETSIIT, University of Cantabria, Avda. Los Castros s/n, 39005 Santander, Spain

Sustainability, 2022, vol. 14, issue 8, 1-21

Abstract: Solidification/stabilization (S/S) of acid waste using Ordinary Portland Cement (OPC) is widely implemented, but, due to the impact on climate change, alternative methods are being investigated. In this work, first, the feasibility of using coal fly-ash/clay-based geopolymers for the S/S of Zn plant residues (ZPR), Cadmium Sponge (CS), and Anode Mud (AM) is proposed as a treatment prior to disposal in landfills. Different variables, such as the type of processing, molding (as-received waste), and pressing (dried waste), and activators, a commercial and an alternative residual sodium carbonate, have been studied. The technical and environmental assessments of the S/S process by means of compressive strength and the leaching of critical pollutants have been monitored. Immobilization efficiencies of Cd and Zn higher than 99% have been obtained by dosing 50% of the acid waste, 6 M NaOH solution (20 min contact time), cured at 75 °C (48 h) and at room temperature (28 days), achieving in the leachates pH values of 7 to 10 and [Cd] and [Zn] < 1 and 2.5 mg/kg, respectively. However, alkaline activation increases As leaching, mainly associated with the clay. Secondly, removing clay from the geopolymer formulation, the optimization of geopolymer parameters, acid waste/geopolymer ratio, liquid/solid ratio, and NaOH molar concentration enables obtaining a significant reduction in the release of As and Cd, and Zn is kept at acceptable values that meet the non-hazardous waste landfill disposal limits for the S/S of both acid wastes.

Keywords: Cadmium Sponge; Anode Mud; coal fly ash; geopolymer; hazardous waste; immobilization (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2022
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2071-1050/14/8/4438/pdf (application/pdf)
https://www.mdpi.com/2071-1050/14/8/4438/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:14:y:2022:i:8:p:4438-:d:789512

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().