Recovery of Zn and Fe from Steelmaking By-Products by Ar Plasma Smelting

Seongkyu Cho, Leonardo Tomas Da Rocha, Sung-Wan Kim and Sung-Mo Jung ()
Additional contact information
Seongkyu Cho: Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang 37673, Republic of Korea
Leonardo Tomas Da Rocha: Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang 37673, Republic of Korea
Sung-Wan Kim: Ironmaking & FINEX Research Group, Process and Engineering Research Laboratory, POSCO, Pohang 37859, Republic of Korea
Sung-Mo Jung: Graduate Institute of Ferrous Technology, Pohang University of Science and Technology, Pohang 37673, Republic of Korea

Sustainability, 2023, vol. 15, issue 17, 1-18

Abstract: Iron-containing by-products have high recycling value as an iron source due to the high content of Fe. However, some impurities in by-products limit their recycling. In particular, zinc in by-products are repeatedly vaporized and recrystallized inside a blast furnace, which deteriorates the operation. It is necessary to remove zinc from by-products by the zinc removal process such as RHF (rotary hearth furnace). However, due to the low removal ratio of zinc in RHF using coal as reducing agent, it is difficult to achieve carbon neutrality. This research investigated the removal of zinc and the recovery of zinc and iron from zinc-containing by-products by Ar plasma smelting. Two kinds of by-products used in this study contained 0.89 and 3.39 wt% of zinc oxide, respectively. One by-product (BP-A) resulted in a mixture of metallic iron and FeO remaining inside the crucible after Ar plasma smelting. The recovery ratio of iron in the product was evaluated as 94.2%, and the removal ratio of zinc was calculated to be 95.6%. The recovery ratio of zinc collected in the form of dust outside the crucible was calculated as 92.5%. The other by-product (BP-B), produced because of Ar plasma, was mostly FeO, and 82.6% of iron was recovered. In total, 96.4% of zinc from BP-B was removed, and 73.1% of zinc was recovered as dust. By the thermodynamic calculation in terms of FactSage 8.2, the temperature of the sample during plasma smelting was expected to be 2500 °C. The main gases generated during smelting were H 2 , CO and CO 2 which were formed at the initial stage of the process.

Keywords: by-products; plasma smelting; zinc removal; zinc recovery; argon plasma (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2071-1050/15/17/12890/pdf (application/pdf)
https://www.mdpi.com/2071-1050/15/17/12890/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:15:y:2023:i:17:p:12890-:d:1225515

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().