Recycling of Metallized Plastic as a Case Study for a Continuous Sustainability Improvement Process

Caitlin Walls (), Bum-Ki Choi, Almy Ruzni Keumala Putri, Adriana Bernal-Osorio, Alan D’Souza, Himanshu Khadse, Monark Ghori, Jürgen Rossa, Siddharth Varute and Gesa Beck
Additional contact information
Caitlin Walls: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Bum-Ki Choi: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Almy Ruzni Keumala Putri: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Adriana Bernal-Osorio: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Alan D’Souza: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Himanshu Khadse: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Monark Ghori: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Jürgen Rossa: Fraunhofer Research Institution for Materials Recycling and Resource Strategies IWKS, Aschaffenburgerstr. 121, 63457 Hanau, Germany
Siddharth Varute: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany
Gesa Beck: Institute of Applied Resource Strategies IARS, SRH Berlin University of Applied Sciences, Ernst-Reuter-Platz 10, 10587 Berlin, Germany

Sustainability, 2023, vol. 15, issue 20, 1-23

Abstract: Emerging technological processes should be designed and operated according to the highest technological performance and sustainability standards. For this reason, assessments should be included during the design stage to track technological, environmental, economic, and social sustainability impacts. This study presents the concept of a Continuous Sustainability Improvement Process (CSIP) with the case study of project ReComp (Development of an Economically and Ecologically Sensible Recycling Method for Metal/Plastic Composites). In this project, metallized plastic production waste from the automotive industry was recycled to produce high-purity copper (Cu), chromium (Cr), and plastic, i.e., Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS). Through CSIP, two stages of ReComp were developed, ReComp I and ReComp II. ReComp I was found to provide a significant environmental improvement compared to the primary production for Cu, Cr, and PC/ABS (>90% improvement for all environmental indicators). However, it was calculated as making 17,000 EUR/annum loss, with a unit processing cost of 103 EUR/kg of waste input and therefore was deemed as not economically sustainable. From this outcome, ReComp II was developed with the purpose of improving the economic outcome by increasing the process’s throughput without the need for significant additional costs. Therefore, the mechanical treatment at the first process step was modified in such a way that the metallized plastics were separated into two fractions, metal flakes and plastic particles. Using these fractions in two parallel process streams, the cycle time was reduced from 15 to 5 days, and throughput of the process-limiting step (electrochemical treatment) increased. Although still not profitable, ReComp II was shown to reduce the process cost per kg of waste input by 93% compared to ReComp I, whilst maintaining the same revenue per kg of waste input. Additionally, ReComp II was shown to provide an improved environmental outcome compared to ReComp I. Therefore, this study proves an important result that a more ecologically sustainable solution can correlate with a more economically sustainable process, due to lower waste formation as well as less material and energy use.

Keywords: sustainability; Continuous Improvement Process; MFCA; LCA; metal recovery; recycling; plated plastic; electrolysis; PC/ABS; chromium; copper (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/2071-1050/15/20/14737/pdf (application/pdf)
https://www.mdpi.com/2071-1050/15/20/14737/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:15:y:2023:i:20:p:14737-:d:1257553

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().