Construction and Performance Evaluation of Polyurethane-Bound Porous Rubber Pavement (PRP) Trial Section in the Cold Climate

Tamanna Kabir () and Susan Tighe
Additional contact information
Tamanna Kabir: Department of Civil and Environmental Engineering, University of Waterloo, 200 University Ave W, Waterloo, ON N2L 3G1, Canada
Susan Tighe: Department of Civil and Environmental Engineering, University of Waterloo, 200 University Ave W, Waterloo, ON N2L 3G1, Canada

Sustainability, 2023, vol. 15, issue 3, 1-31

Abstract: Porous pavements are designed and used in current construction practices to address environmental and safety issues related to wet weather. Porous rubber pavement (PRP) is a novel porous pavement material consisting of recycled crumb tire rubbers, stone aggregates, and polyurethane binders. The higher permeability (up to 45% of air voids) of PRP and its composition offers excellent benefits to the urban hydrological system and environment. Due to its recent outset in the Canadian climate, its properties and performance are not yet investigated. This research investigates PRP’s properties and performance as pavement material through the construction of two trial sections incorporating three newly developed PRP mixes along with a Control Mix. Samples were obtained from the field and tested in the laboratory to determine the mechanical and durability properties, including indirect tensile strength, moisture-induced damage due to freeze-thaw cycles and permanent deformation. A field evaluation was also performed three times: right after construction, three weeks later and after seven months to determine stiffness, frictional properties, roughness and permeability. The results revealed that all PRP mixes exhibited excellent permeability and retained more than 68% of tensile strength after five freeze-thaw cycles. Although PRP showed significantly lower initial elastic modulus than conventional pavement material, ranging between 28 MPa to 59 MPa, in the springtime none of them went below 23 MPa. Material composition, site geometry and subgrade conditions were found to be the main factors influencing the field performance of PRP pavement.

Keywords: porous rubber pavement; trial section construction; mechanical properties; durability; stiffness; frictional property; permeability (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/2071-1050/15/3/2413/pdf (application/pdf)
https://www.mdpi.com/2071-1050/15/3/2413/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:15:y:2023:i:3:p:2413-:d:1050533

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().