Research on the Detection and Measurement of Roughness of Dam Concrete Layers Using 3D Laser Scanning Technology

Nuo Hu, Zhuo Chen, Rui Ma and Haiyang Liu ()
Additional contact information
Nuo Hu: Institute for Public Safety Research, Department of Engineering Physics, Tsinghua University, Beijing 100084, China
Zhuo Chen: Institute for Public Safety Research, Department of Engineering Physics, Tsinghua University, Beijing 100084, China
Rui Ma: State Key Laboratory of Hydroscience and Engineering, Department of Hydraulic Engineering, Tsinghua University, Beijing 100084, China
Haiyang Liu: Institute for Public Safety Research, Department of Engineering Physics, Tsinghua University, Beijing 100084, China

Sustainability, 2023, vol. 15, issue 3, 1-19

Abstract: The roughness of the interlayer concrete, which is an important index for the construction of dams, affects the mechanical properties of the interface between new and old concrete. The traditional monitoring method cannot satisfy field measurements. Therefore, this paper proposes a concrete surface roughness measurement method based on 3D laser scanning technology and implements 3D point cloud calculations. Two layers of specimens with same concrete mix proportion were poured 28 days apart, and a splitting tensile strength test of the superimposed specimen was carried out. Four groups of experiments (MR-S, MR-N, MR-15, and MR-35) tested the interlaminar tensile splitting strength of nine 150 mm cubic specimens on the 3rd, 7th, 14th, and 28th days, respectively. Filling volume, mean amplitude, surface area expansion rate, normal angle std. dev., and curvature std. dev. were measured in the study. The results showed that as the surface roughness of the concrete increased, as did the flushing pressure. The splitting strength of the concrete interface after it solidified increased with age. At 28 days, the splitting strength of MR-15 was higher than that of MR-35. The mean amplitude and the normal angle std. dev. of the rough surface could replace the traditional filling volume index. The new 3D point cloud calculation method for calculating concrete surface roughness was proven by experiments to have good performance.

Keywords: concrete roughness; 3D laser scanning; point cloud computing; split tensile strength (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2023
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2071-1050/15/3/2649/pdf (application/pdf)
https://www.mdpi.com/2071-1050/15/3/2649/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:15:y:2023:i:3:p:2649-:d:1054453

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().