Influence of Printing Interval on the Imbibition Behavior of 3D-Printed Foam Concrete for Sustainable and Green Building Applications

Xiaoshuang Liu, Shiming Li, Yanjun Duan, Zhiqin Du, Xiaobao Zuo, Jianjun Dong () and Helan Cheng ()
Additional contact information
Xiaoshuang Liu: School of Safety Science and Engineering, Nanjing University of Science & Technology, Nanjing 210094, China
Shiming Li: School of Safety Science and Engineering, Nanjing University of Science & Technology, Nanjing 210094, China
Yanjun Duan: National-Local Joint Engineering Research Center for Biomass Materials of Electromechanical Product Packaging, Nanjing Forestry University, Nanjing 210037, China
Zhiqin Du: Nanjing Hydraulic Research Institute, Nanjing 210029, China
Xiaobao Zuo: School of Safety Science and Engineering, Nanjing University of Science & Technology, Nanjing 210094, China
Jianjun Dong: School of Safety Science and Engineering, Nanjing University of Science & Technology, Nanjing 210094, China
Helan Cheng: Nanjing Geological Engineering Investigation Institute of Jiangsu Province, Nanjing 210029, China

Sustainability, 2024, vol. 16, issue 17, 1-22

Abstract: Foam concrete is highly valued as a sustainable cement-based material, but the development of 3D-printed foam concrete (3DPFC) has remained constrained. This study investigated the influence of printing interval on the microstructure and imbibition behavior of 3DPFC. The results revealed that horizontal interlayers are broader compared to vertical interlayers, leading to more significant imbibition. For X-oriented 3DPFC, the vertical interlayer was rapidly occupied by water after imbibition, forming an elliptical moisture profile. For Y-oriented 3DPFC, the moisture profile appeared more convoluted, mainly surrounding the horizontal interlayers but shifting at intersections with the vertical interlayers. In Z-oriented 3DPFC, where only tight horizontal interlayers were present, interlayer imbibition was almost negligible. Additionally, when the printing interval was less than 15 min, imbibition was primarily restricted to the top filament since the bottom filament was compacted by the filament above. Conversely, with a printing interval longer than 15 min, the bottom filament hardened before the setting of the top filament. This allowed the surface of the bottom filament to be compacted by the top filament, resulting in a dense interlayer that offers better resistance against imbibition compared to the matrix of 3DPFC. This work contributes to the advancement of green building technologies by providing insights into optimizing the 3D printing process for foam concrete, thereby enhancing its structural performance without compromising the designated air content and consistency of the foam concrete, facilitating a more efficient utilization of materials and a reduction in overall material consumption.

Keywords: foam concrete; imbibition; 3D printing; sustainable cement-based materials; microstructure (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2071-1050/16/17/7841/pdf (application/pdf)
https://www.mdpi.com/2071-1050/16/17/7841/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:16:y:2024:i:17:p:7841-:d:1474152

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().