Journal of Materials Science Research

2020 - 2024

From Canadian Center of Science and Education
Contact information at EDIRC.
Bibliographic data for series maintained by Canadian Center of Science and Education ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Investigation to enhanced Physical and Mechanical Properties of Road Pavement in Asphalt Incorporating Low-Density Waste Plastic Bags pp. 1-15: Etienne Malbila, Ertha Z.G. Awandza, Yasmine Binta Traore, Justin Kinda and Sié Kam
On the Onset of Plasticity: Determination of Strength and Ductility pp. 16-27: Alan F. Jankowski

The Degradation in Creep Strength of ASME Grade 122 Steel pp. 1-72: Manabu Tamura and Fujio Abe
Evaluation of the Structural Performance of Lime-Stabilized cubitermes sp Termite Mound Soil as a Sub-Base Layer for Sustainable Pavements pp. 73-87: Louis Ahouet, Sylvain Ndinga Okina, Adolphe Ekouya and Franck Taillandier
Correlation of Accelerated Corrosion and Real Reinforced Concrete Water Structures pp. 88-102: Philip Mogire
Electron Theory of Metals - Answers to Unsolved Problems/Questions pp. 103-114: Joachim Sonntag
Reviewer acknowledgements for Journal of Materials Science Research, Vol. 12, No. 2 pp. 115: John Martin

An Improved Model for Estimation of Mechanical Properties of Polymer-Clay Nano-Composites pp. 1-8: Abdulhamid A. Al-Abduljabbar
A Short Literature Review on Turning and Milling of Cobalt Alloys pp. 9-21: Edinan Casagrande, DiÃ³genes Barbosa Teles and Mauricio Rodrigues Policena
Mechanical Performance of Hybrid Graphene Nanoplates, Fly-Ash, Cement, Silica, and Sand Particles Filled Cross-Ply Carbon Fibre Woven Fabric Reinforced Epoxy Polymer Composites Beam and Column pp. 22-35: Till Quadflieg, Vijay K. Srivastava, Thomas Gries and Shantanu Bhatt
Solid-State Characterization of Heteropolyacid-Phyllosilicate Complexes: Structural, Morphological and Thermal Properties pp. 36-50: Pascal Y. Vuillaume, Asmae Mokrini, Lucie Robitaille, Philippe BÃ©bin and Lori Leblond
Characterization of Clay Materials from CÃ´te dâ€™Ivoire: Possible Application for the Electrochemical Analysis pp. 51-84: Segneninhintenin Bakary Soro, Mariame Coulibaly, Legre Paul Gauly, Seiny Roger Nâ€™Dri, Ali Sanou and Albert Trokourey
Reviewer acknowledgements for Journal of Materials Science Research, Vol. 12, No. 1 pp. 65: Jhon Martin

Root Cause of Degradation in the Creep Strength of Martensitic Steel pp. 1: Manabu Tamura
Improving the Life Service of Fe-34Mn-10Al-0.76C Tidal Turbine Blades Using Variable PMF pp. 40: Eisa A. Almeshaiei, Lubanah Ahmad and Ibrahim Elgarhi
Dopamine-Derived Graphite-Like Hard Carbon Materials for High-Performance Li+ Ions Storage pp. 59: Xianfa Rao, Baobao Li, Kuang Lei, Yitao Lou, Lixia Zhang, Longhai Weng, Longxing Chen, Xuanbo Shi, Shengwen Zhong, Bao Liu and Li Wang
Dynamic Fracture Toughness Behaviour of CFRP-Foam-CFRP Sandwich Composite and Particles Filled Hybrid Glass Fiber Cloth, Graphene Nanoplates Coated Glass Fiber Strand Composite Materials under Low Impact Velocity pp. 70: V. K. Srivastava
New Interferometric Method and Device for Measuring the X-Ray Train Length pp. 85: H. R. Drmeyan and S. A. Mkhitaryan
Reviewer acknowledgements for Journal of Materials Science Research, Vol. 11, No. 1 pp. 91: John Martin

Analysis of the Degradation in the Creep Strength of High-Cr Martensitic Steels pp. 1: Manabu Tamura and Fujio Abe
The Relationship between Bond Strength and Critical Penetration Depth of Rust in Reinforced Concrete Structures pp. 71: Philip Mogire, John Mwero, Silvester Abuodha and Geoffrey Mang’uriu
Characterization of PZ27 and PZ52 Piezoceramics from Electrical Measurements pp. 84: Oumar Diallo, Harouna Mamadou Bal, Mamadou Babacar Ndiaye, Salif Gaye and Guy Feuillard
Reviewer acknowledgements for Journal of Materials Science Research, Vol. 10, No. 2 pp. 92: John Martin

Analysis on Degradation in Creep Strength of 9Cr-W Martensitic Steel pp. 1: Manabu Tamura and Fujio Abe
Canola Meal Adhesive for the Production of Wood Fiber Insulation Boards Using Hot-Air/Hot-Steam-Process pp. 28: Kolja Ostendorf, Julian Haerkötter and Markus Euring

Microstructure Refinement for Fe-34Mn-10Al-0.76C Alloy Using Variable Pulsing Magnetic Field (PMF) Solidification pp. 1: Eisa A. Almeshaiei, Lubanah Ahmad and Ibrahim Elgarhi
Correlation between Voids Ratio and Characteristic Responses to Ultrasonic Pulses Through Sandy Soils pp. 13: Fernanda V. Goncalves, Duilio N. Ferronatto Leite and Jose A. de Castro
Adsorption Characteristics of Zeolite A Synthesized from Wassa Kaolin for Thermal Energy Storage pp. 21: Linus Kweku Labik, Bright Kwakye-Awuah, Eric Kwabena Kyeh Abavare, Baah Sefa-Ntiri, Isaac Nkrumah and Craig Williams

Sustainable Thermosets Obtained by Copolymerization of Humins with Triglycidyl Ether of Phloroglucinol pp. 1: Roxana Dinu and Alice Mija
Use of Hardwood Species (Robinia pseudoaccacia from Short-rotation Plantations as Raw Material in Particleboards pp. 18: J. Lawrence Tene Tayo, Achale Travolta Achale and Markus Euring
Bio-Based Composites from Industrial By-products and Wastes as Raw Materials pp. 29: Roxana Dinu and Alice Mija
Adoption of NPS Fertilizer on Sorghum Crop Production by Smallholder Farmers in Gemechis and Mieso Districts of West Hararghe Zone, Oromia Regional State, Ethiopia pp. 46: Muhammed Shako Hiko
Prediction of the Emissivity Curve at High Temperatures of Low Carbon Steel pp. 59: Vinicius Santos de Deus, José Adilson de Castro and Sandro Rosa Rosa Corrêa
Reviewer acknowledgements for Journal of Materials Science Research, Vol. 9, No. 2 pp. 71: Lily Green

The Influence of Oxidizing Agent in the Chemical Deposition of Polypyrrole on Lead Alloy Surface pp. 1: Inês Moreira Vilanova Pinheiro and Liu Yao Cho
Metal Complexes Derived of Diosmin with Biological Activities in vitro pp. 10: Maéli M. F. Civa, Dirceu G. de Souza, Renata G. Silva, Dayany da S. A. Maciel, Ricardo L. Tranquilin, Susana N. Diniz, Cristina E. Okuyama, Márcio L. dos Santos and Regina M. S. Pereira
Study of Martensitic Transformation in 304L Austenitic Stainless Steel after Tensile and Low Cycle Fatigue Tests pp. 22: Gláucio Soares da Fonseca, Silvana Carreiro de Oliveira, Jéssica Gadêlha Chaves, Pedro Pena Leite, Fabiane Roberta Freitas Da Silva and Luiz Carlos Rolim Lopes
Vibratory Stress Relief and Vibratory Weld Conditioning of Flux cored arc welded CA6NM steel pp. 32: Luiz Fernando Cursino Briet de Almeida, Julio Cesar Lourenco, Maria Ismenia Sodero Toledo Faria, Decio Lima Vieira, Alain Laurent Marie Robin and Carlos Angelo Nunes
Synthesis and Study of Thermo Physical Properties of Phthalic anhydride glycerol Resin (PAGR) from Soybean Oil pp. 42: Shafqat Abbas and Zaheer Ahmad
Reviewer acknowledgements for Journal of Materials Science Research, Vol. 9, No. 1 pp. 48: Lily Green