Micromachining of bipolar plates used in proton exchange membrane fuel cells

Mark J. Jackson, Grant M. Robinson and Mike P. Brady

International Journal of Manufacturing Technology and Management, 2008, vol. 13, issue 2/3/4, 124-145

Abstract: Bipolar Proton Exchange Membrane (PEM) fuel cell plates are composed of flat pieces of graphite with channels or trenches machined into the face of the plate so that gases can flow in the channels of the plate. The operation of the fuel cell is dependent on the flow of oxygen and hydrogen gases around a fuel cell stack, which is composed of many thin plates connected to each other in very close proximity. Owing to the brittle nature of graphite, bipolar plates are now made from nickel-chromium alloys that are coated with a thin solid layer of CrN or TiN to improve corrosion resistance. However, nickel-chromium alloys are notoriously difficult to machine. This paper describes the micromachining of fuel cell plates that are machined at very high speeds in order to produce high cutting tool life and low surface roughness using novel nanocrystalline diamond and titanium coatings that have been specifically designed to cut strain-hardening alloys at extremely high speeds.

Keywords: nanostructured coatings; surfaces; metals; micromachining; machinability; PEM fuel cells; bipolar plates; proton exchange membrane; tool life; surface roughness; nanocrystalline diamond coatings; titanium coatings; strain-hardening alloys; high speed machining. (search for similar items in EconPapers)
Date: 2008
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.inderscience.com/link.php?id=16767 (text/html)
Access to full text is restricted to subscribers.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:ids:ijmtma:v:13:y:2008:i:2/3/4:p:124-145

Access Statistics for this article

More articles in International Journal of Manufacturing Technology and Management from Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().