Experimental investigation on dry EDM using helium gas dielectric

P. Govindan, Rahul Agrawal and Suhas S. Joshi

International Journal of Manufacturing Technology and Management, 2011, vol. 24, issue 1/2/3/4, 40-56

Abstract: A dry EDM process uses a gaseous dielectric, as a possible substitute for liquid dielectric for precision machining. Due to fluctuations in temperature and oxidation on the dry EDMed surface, critical issues regarding this process are: 1) presence of micro-cracks on dry EDMed surface; 2) surface damage due to arcing; 3) reattachment of work material on the tool; 4) large dimensional oversize in the dry EDMed holes. This work proposes use of helium gas dielectric to effectively cool machined surfaces so as to reduce damage and improve machining accuracy. In this regard, a systematic experimentation using Taguchi L₈ orthogonal array has been performed to understand the influence of processing parameters and helium gas dielectric on MRR, TWR, oversize and depth achieved. It is observed that the use of helium gas significantly reduces thermal damage on machined surfaces, and helps lower work material deposition on the tool, and the oversize in dry ED machined holes. The analysis of results show that speed (N) and current (I) are the dominant factors that influence MRR and oversize, whereas dielectric gas pressure (P) is the most significant in influencing TWR.

Keywords: dry EDM; helium gas dielectric; material removal rate; MRR; TWR; oversize; depth; electrical discharge machining; electro-discharge machining; tool wear rate; dry machining; micro cracks; surface cooling; orthogonal arrays; Taguchi methods; thermal damage. (search for similar items in EconPapers)
Date: 2011
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.inderscience.com/link.php?id=46759 (text/html)
Access to full text is restricted to subscribers.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:ids:ijmtma:v:24:y:2011:i:1/2/3/4:p:40-56

Access Statistics for this article

More articles in International Journal of Manufacturing Technology and Management from Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().