A simple method for the calculation of dialysis Kt factor as a quantitative measure of removal efficiency of uremic retention solutes: Applicability to high-dialysate vs low-dialysate volume technologies

Giacomo Colussi, Chiara Carla Maria Brunati, Francesca Gervasi, Alberto Montoli, Denise Vergani, Federica Curci and Enrico Minetti

PLOS ONE, 2020, vol. 15, issue 5, 1-14

Abstract: Dialysis urea removal metrics may not translate into proportional removal efficiency of non-urea solutes. We show that the Kt factor (plasma volume totally cleared of any solutes) differentiates removal efficiency of non-urea solutes in different technologies, and can easily be calculated by instant blood-dialysate collections. We performed mass balances of urea, creatinine, phosphorus and beta2-microglobulin by whole dialysate collection in 4 low-flux and 3 high-flux hemodialysis, 2 high-volume post-hemodiafiltration and 7 short-daily dialysis with the NxStage-One system. Instant dialysate/blood determinations were also performed at different times, and Kt was calculated as the product of the D/P ratio by volume of delivered dialysate plus UF. There were significant differences in single session and weekly Kt (whole dialysate and instant calculations) between methodologies, most notably for creatinine, phosphorus and beta2-microglobulin. Urea Kt messured in balance studies was almost equal to that derived from the usual plasma kinetic model-based Daugirdas’ equation (eKt/V) and independent V calculation, indicating full correspondence. Non-urea solute Kt as a fraction of urea Kt (i.e. fractional removal relative to urea) showed significant differences between technologies, indicating non-proportional removal of non-urea solutes and urea. Instant Kt was higher than that in full balances, accounting for concentration disequilibrium between arterial and systemic blood, but measured and calculated quantitative solute removal were equal, as were qualitative Kt comparisons between technologies. Thus, we show that urea metrics may not reliably express removal efficiency of non-urea solutes, as indicated by Kt. Kt can easily be measured without whole dialysate collection, allowing to expand the metrics of dialytic efficiency to almost any non-urea solute removed by dialysis.

Date: 2020
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0233331 (text/html)
https://journals.plos.org/plosone/article/file?id= ... 33331&type=printable (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:plo:pone00:0233331

DOI: 10.1371/journal.pone.0233331

Access Statistics for this article

More articles in PLOS ONE from Public Library of Science
Bibliographic data for series maintained by plosone (plosone@plos.org).