Prediction of cutting force by using ANFIS

Vineet Jain () and Tilak Raj ()
Additional contact information
Vineet Jain: Amity University Haryana
Tilak Raj: YMCA University of Science and Technology

International Journal of System Assurance Engineering and Management, 2018, vol. 9, issue 5, No 13, 1137-1146

Abstract: Abstract The aim of this research is to develop a model to predict the cutting forces of a turning operation. This paper focuses on to design a monitoring system that can recognize cutting force on the basis of cutting parameters like spindle speed, feed and depth of cut by using adaptive neuro-fuzzy inference system (ANFIS). Cutting force is one of the important characteristic variables to be watched and controlled in the cutting processes to determine tool life and surface roughness of the work piece. The principal assumption was that the cutting forces increase due to the wearing of the tool. So, ANFIS model is used to express the cutting force signal. In this paper, ANFIS is used to predict the cutting force. The correlation coefficient (R) and average percentage error found in this modeling are 0.9976 and 2.59% respectively. The predicted cutting force values derived from ANFIS were compared with experimental data. The comparison indicates that the ANFIS achieved very satisfactory accuracy. The correlation coefficient (R) and average percentage error found in this modeling are 0.9976 and 2.59% respectively. The prediction accuracy of ANFIS reached is as high as 97%.

Keywords: Cutting force; Modelling; Cutting force estimation; ANFIS (search for similar items in EconPapers)
Date: 2018
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
http://link.springer.com/10.1007/s13198-018-0717-x Abstract (text/html)
Access to the full text of the articles in this series is restricted.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:spr:ijsaem:v:9:y:2018:i:5:d:10.1007_s13198-018-0717-x

Ordering information: This journal article can be ordered from
http://www.springer.com/engineering/journal/13198

DOI: 10.1007/s13198-018-0717-x

Access Statistics for this article

International Journal of System Assurance Engineering and Management is currently edited by P.K. Kapur, A.K. Verma and U. Kumar

More articles in International Journal of System Assurance Engineering and Management from Springer, The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().