Optimization methodology assessment for the inlet velocity profile of a hydraulic turbine draft tube: part II—performance evaluation of draft tube model

Galván Sergio (), Rubio Carlos (), Jesús Pacheco (), Solorio Gildardo () and Carbajal Georgina ()

Journal of Global Optimization, 2013, vol. 55, issue 4, 729-749

Abstract: Computational Fluids Dynamics (CFD) tools guide engineers and designers to estimate the performance of new designs. However, a CFD analysis can be very time-consuming depending mainly on the grid size and domain complexity. Thus, this paper aims to describe the tools used to evaluate and compare the performance of different 3D draft tube models for reducing the time-effort needed in an optimization procedure. The results presented here, are the second part of an overall research to establish a global optimization methodology to improve the performance of an hydraulic draft tube through the inlet velocity profile. Previously, three steps of optimization methodology to minimize the energy losses were studied: the inlet velocity profile parameterization, the numerical optimization set-up and the objective function validation. In the latter step, a global optimization method called Multi Island Genetic Algorithm (MIGA) was considered, which requires a large number of iterations before producing a reliable result. This step is able to identify an efficient inlet velocity profile to minimize the energy losses through the draft tube model. However, each iteration is expensive in terms of computational time due to the need for 3D Navier–Stokes (NS) computations to evaluate each profile’s fitness. Thus, in this work the methodology attempts to accelerate the optimization process with accurate results. In order to achieve the goal, the grid size of the 3D draft tube model was minimized, resulting in a much lower computational cost. Specifically, the draft tube calculations were performed on a sequence of five different grids each having approximately twice the number of elements compared to the previous. The measurements of the sensitivity of the draft tube performance quantities to the change of the inlet velocity parameters during the process showed that, in spite of the numerical difference between its performance, the results have the same tendency. Consequently, the 3D draft tube numerical model with a minimal grid size, is reliable and left record of its capabilities for being integrated in the optimization process. Copyright Springer Science+Business Media New York 2013

Keywords: Numerical optimization; Hydraulic turbine draft tube; Grid convergence; CFD (search for similar items in EconPapers)
Date: 2013
References: View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
http://hdl.handle.net/10.1007/s10898-012-0011-4 (text/html)
Access to full text is restricted to subscribers.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:spr:jglopt:v:55:y:2013:i:4:p:729-749

Ordering information: This journal article can be ordered from
http://www.springer. ... search/journal/10898

DOI: 10.1007/s10898-012-0011-4

Access Statistics for this article

Journal of Global Optimization is currently edited by Sergiy Butenko

More articles in Journal of Global Optimization from Springer
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().