Dynamic soil properties and seismic ground response analysis for North Indian seismic belt subjected to the great Himalayan earthquakes

Nitish Puri (), Ashwani Jain, George Nikitas, Pradeep Kumar Dammala and Subhamoy Bhattacharya
Additional contact information
Nitish Puri: University of Surrey
Ashwani Jain: National Institute of Technology Kurukshetra
George Nikitas: University of Surrey
Pradeep Kumar Dammala: University of Surrey
Subhamoy Bhattacharya: University of Surrey

Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, 2020, vol. 103, issue 1, No 21, 447-478

Abstract: Abstract The paper highlights the importance of using site-specific shear modulus reduction (G/Gmax versus shear strain, γ) curves and damping ratio (D versus shear strain, γ) curves for ground response analysis. In order to develop comprehensive G/Gmax–γ and D–γ curves (i.e. over a wide range of strain level), two types of apparatus, viz. resonant column and cyclic simple shear, have been used. The case study considered the geological deposits from the river beds of Yamuna River originating from the Himalayan seismic zone of North India. The tests results have been analysed to develop G/Gmax–γ and D–γ curves and compared with standard curves. It has been observed that upper and lower boundaries for the standard curves are remarkably different for the geological deposit under consideration. In order to assess the impact of using standard curves rather than site-specific curves, ground response analysis has been carried out at five sites along the Yamuna River using two types of curves (standard and site-specific developed in this study). The study showed that the amplification of shear waves at these sites based on the experimentally derived curves is much higher as compared to the standard curves. The proposed curves better represent dynamic behaviour of the soil deposits of the region and will provide a realistic response as far as practically possible, for the structures constructed in the states of Haryana and Delhi and nearby areas. It is anticipated that the data presented in this paper will have wide application and usage.

Keywords: Shear modulus degradation; Material damping; Resonant column test; Cyclic simple shear test; Yamuna sands; Haryana (search for similar items in EconPapers)
Date: 2020
References: View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
http://link.springer.com/10.1007/s11069-020-03995-w Abstract (text/html)
Access to the full text of the articles in this series is restricted.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:spr:nathaz:v:103:y:2020:i:1:d:10.1007_s11069-020-03995-w

Ordering information: This journal article can be ordered from
http://www.springer.com/economics/journal/11069

DOI: 10.1007/s11069-020-03995-w

Access Statistics for this article

Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards is currently edited by Thomas Glade, Tad S. Murty and Vladimír Schenk

More articles in Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards from Springer, International Society for the Prevention and Mitigation of Natural Hazards
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().