 Sensitivity of high-resolution tropical cyclone intensity forecasts to surface flux parameterizationChi-Sann Liou () Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, 2007, vol. 41, issue 3, 387-399 Abstract: Surface flux parameterization schemes used in current dynamic models are primarily based upon measurements at low and moderate wind speeds. Recent studies show that these parameterization schemes may be incorrect at high wind speeds (e.g., tropical cyclone forecasts). Five high-resolution numerical model experiments are designed to assess the sensitivity of tropical cyclone intensity forecasts to changes in the surface flux parameterization. The sensitivity experiments are conducted by running 48 h forecasts of the Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS) for six selected tropical cyclones with individual modifications to surface flux calculation that include: (1) limiting the surface stress for wind speeds greater than 33 m s −1 , or 64 knots (kt); (2) computing the stress at the top of the model bottom grid layer (MBGL) by averaging results from surface layer similarity and turbulence mixing parameterization for wind speeds greater than 33 m s −1 ; (3) increasing the roughness lengths for heat and moisture transfer by a factor of ten; (4) setting the roughness lengths for heat and moisture transfer to 1/10 of the momentum roughness length; and (5) cooling the sea surface temperature (SST) by a prescribed rate at high winds. Averaged responses for the six storms to these sensitivity tests show that: (i) the limit on surface stress at high winds significantly increases the cyclone intensity in 48 h forecasts; (ii) the averaged surface layer stress at high winds increases the cyclone intensity but to a much lesser degree than limiting the surface stress; (iii) large increases in the roughness lengths for heat and moisture transfer are needed to significantly impact the intensity forecast; (iv) the different roughness length formula for surface transfer coefficients notably increases C h /C d ratio from 0.59 to 0.79 for 25 m s −1 and 0.41 to 0.75 for 50 m s −1 that significantly increases the predicted cyclone intensity; and (v) cooling of the SST by −5.8°C in 48 h reduces the maximum surface wind speed by −32 kt, or 16.5 m s −1 , at 48 h forecast. These results suggest that a surface flux parameterization scheme suitable for tropical cyclone intensity forecast must correctly model the leveling-off character of surface stress and C h /C d ratio at high winds. All modifications to surface flux calculation have little influence on 48 h track forecasts, even though they may significantly impact the intensity forecasts. Copyright Springer Science+Business Media, Inc. 2007 Keywords: Tropical cyclone intensity forecast; Surface flux at high winds; Surface stress limit; Roughness length; Sea surface temperature (search for similar items in EconPapers) Downloads: (external link) Related works: Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text Persistent link: https://EconPapers.repec.org/RePEc:spr:nathaz:v:41:y:2007:i:3:p:387-399 Ordering information: This journal article can be ordered from DOI: 10.1007/s11069-006-9046-5 Access Statistics for this article Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards is currently edited by Thomas Glade, Tad S. Murty and Vladimír Schenk More articles in Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards from Springer, International Society for the Prevention and Mitigation of Natural Hazards |
Is your work missing from RePEc? Here is how to contribute.
Questions or problems? Check the EconPapers FAQ or send mail to .
EconPapers is hosted by the
School of Business at Örebro University.