Modeling the Effect of Cistern Size, Soil Type, and Irrigation Scheduling on Rainwater Harvesting as a Stormwater Control Measure

Sa’d Shannak, Fouad Jaber () and Bruce Lesikar

Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), 2014, vol. 28, issue 12, 4219-4235

Abstract: Urban stormwater runoff could have negative impacts on water resources and the environment. Rainwater Harvesting (RWH) can serve both as a stormwater control and water conservation measure. Cistern size and irrigation scheduling are two of the factors that directly impact the total runoff from a residential unit with a RWH system and the amount of potable water used for irrigation. The effectiveness of RWH was evaluated for four soil types; Sand, Sandy Loam, Loamy Sand, and Silty Clay, with a root zone of 15.2 cm using three irrigation scheduling methods (Evapotranspiration (ET)-based, soil moisture-based, and time-based), and five cistern sizes. Total runoff volumes and total supplemental potable water used were compared among the three irrigation scheduling systems and a control treatment without RWH. A model was developed to simulate the daily water balance for the treatments. Irrigation and runoff volumes were compared for the various scenarios. Silty clay soil resulted with 83 % more runoff than Sandy soil, while Sandy soil required on average 58 % more supplemental water than Silty Clay soil. On average, the 833 L cistern resulted with 41 % savings in water supply and 45 % reduction in total runoff. Results showed that the greatest volumes of runoff predicted were for the silty clay soil Control Treatment using a time-based irrigation scheduling method, while the least volumes calculated were for the sandy loam soil time-based irrigation scheduling treatment with 833 L cistern size. The greatest volumes of total supplemental water predicted were for sandy loam soil Control Treatment, while the least volumes were for silty clay soil ET-based irrigation scheduling treatment with 833 L cistern size. Regression equations were developed to allow for users to select a RWH cistern size based on the amount of water they want to save or runoff to reduce. Copyright Springer Science+Business Media Dordrecht 2014

Keywords: Cistern; Rainwater harvesting; Irrigation-scheduling; Stormwater; Runoff; Model (search for similar items in EconPapers)
Date: 2014
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
http://hdl.handle.net/10.1007/s11269-014-0740-x (text/html)
Access to full text is restricted to subscribers.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:spr:waterr:v:28:y:2014:i:12:p:4219-4235

Ordering information: This journal article can be ordered from
http://www.springer.com/economics/journal/11269

DOI: 10.1007/s11269-014-0740-x

Access Statistics for this article

Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA) is currently edited by G. Tsakiris

More articles in Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA) from Springer, European Water Resources Association (EWRA)
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().