Energy efficiency facets: innovative district cooling systems

Francesco Passerini (), Raymond Sterling, Marcus Keane, Krzysztof Klobut and Andrea Costa
Additional contact information
Francesco Passerini: R2M Solution Srl, Italy
Raymond Sterling: National University of Ireland Galway, Ireland
Marcus Keane: National University of Ireland Galway, Ireland
Krzysztof Klobut: VTT Technical Research Centre of Finland Ltd, Finland
Andrea Costa: R2M Solution Srl, Italy

Entrepreneurship and Sustainability Issues, 2017, vol. 4, issue 3, 310-318

Abstract: Cooling demand in buildings is globally increasing, therefore developing more efficient cooling systems is important for the sustainability of European cities. Directive 2012/27/EU of the European Parliament and of the council on energy efficiency states: “Member States should carry out a comprehensive assessment of the potential for high-efficiency cogeneration and district heating and cooling”. The EU project INDIGO is investigating this issue considering also the economic efficiency and the use of renewable energy sources. In a district cooling system different kinds of cooling production can be combined. E.g., the use of absorption chillers with waste heat or through the solar cooling or the use of free cooling (generally the heat is rejected to seas, lakes, rivers or waterways) offer the possibility of a more sustainable way of cooling. Controlling those systems in an efficient way is a complex problem (consider that the cooling demand is much more difficult to predict than the heat demand, particularly the peaks, and sources such as the solar energy and the waste heat are not predetermined by the designers). The main results of INDIGO will be the development of: - predictive controllers (responsible for obtaining the HVAC systems set-points and based on component dynamic thermos-fluid models, some of them also including embedded self-learning algorithms); - system management algorithms (focused on energy efficiency maximization or energy cost minimization); - an open-source planning tool (based on design and performance parameters as well as simulation and optimisation results; LCA framework will be used as a method for both economic feasibility and climate impact assessment). To validate the results, the consortium is analysing case studies, both through energy modelling and through on-site observations and measurements. The present paper focuses mainly on the development of dynamic energy models and on their use in the context of the project.

Keywords: energy efficiency; predictive controllers; new system management algorithms; new planning tool; more efficient district cooling systems; energy models (search for similar items in EconPapers)
JEL-codes: C63 C88 (search for similar items in EconPapers)
Date: 2017
References: Add references at CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
https://jssidoi.org/jesi/uploads/articles/15/Passe ... _cooling_systems.pdf (application/pdf)
https://jssidoi.org/jesi/article/107 (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:ssi:jouesi:v:4:y:2017:i:3:p:310-318

DOI: 10.9770/jesi.2017.4.3S(6)

Access Statistics for this article

Entrepreneurship and Sustainability Issues is currently edited by Manuela Tvaronaviciene

More articles in Entrepreneurship and Sustainability Issues from VsI Entrepreneurship and Sustainability Center
Bibliographic data for series maintained by Manuela Tvaronaviciene ().