The mineral sequestration of CO2 with the use of fly ash from the co-combustion of coal and biomass

Uliasz-Bocheńczyk Alicja (), Pawluk Aleksandra and Pyzalski Michał
Additional contact information
Pawluk Aleksandra: AGH University of Science and Technology, Faculty of Mining, and Geoengineering, Krakow, Poland
Pyzalski Michał: AGH University of Science and Technology, Faculty of Faculty of Materials Science and Ceramics, Krakow, Poland

Gospodarka Surowcami Mineralnymi / Mineral Resources Management, 2017, vol. 33, issue 4, 143-155

Abstract: As a result of energy production processes, the power industry is the largest source of CO2 emissions in Poland. Emissions from the energy sector accounted for 52.37% (162 689.57 kt) of the total emissions in 2015, which was estimated at 310.64 million tons of CO2. In recent years, the tightening of regulations on the use of renewable energy sources has resulted in an increased amount of biomass used in the professional energy industry. This is due to the fact that the CO2 emissions from biomass combustion are not included in the total emissions from the combustion of fuels, resulting in the zero- emission factor for biomass. At the same time, according to the hierarchy of waste management methods, recycling is the preferred option for the management of by-products generated during energy production. The fly ashes resulting from the biomass combustion in pulverized boilers (which, due to their chemical composition, can be classified as silicate ash) were subjected to analysis. These ashes can be classified as waste 10 01 17 - fly ash from co-firing other than mentioned in 10 01 16 according to the Regulation of the Minister of the Environment of December 9, 2014 on waste catalogues. The maximum theoretical carbon dioxide binding capacity for the analyzed fly ashes resulting from the co-combustion of biomass is 8.03%. The phase composition analysis of the fly ashes subjected to carbonation process has shown, in addition to the components identified in pure fly ash samples (SiO2, mullite), the presence of calcium carbonate − calcite − the primary product of the carbonation process, as indicated by the results of both X-ray and thermogravimetric analysis.The degree of carbonation has been determined based on the analysis of the results of the phase composition of fly ash resulting from the co-firing of biomass and bituminous coal. The calculated degree of carbonation amounted to 1.51%. The carbonation process is also confirmed by the lowered pH of the water extracts, decreasing from 11.96 for pure ashes to 8.7 for CO2 treated fly ashes. In addition, the carbonation process has reduced the leaching of pollutants, most notably chlorides, sulphates, and potassium.

Keywords: fly ash; biomass co-combustion; CO2 mineral sequestration; gas-solid carbonation (search for similar items in EconPapers)
Date: 2017
References: Add references at CitEc
Citations:

Downloads: (external link)
https://doi.org/10.1515/gospo-2017-0044 (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:vrs:gosmin:v:33:y:2017:i:4:p:143-155:n:4

DOI: 10.1515/gospo-2017-0044

Access Statistics for this article

Gospodarka Surowcami Mineralnymi / Mineral Resources Management is currently edited by Ney Roman

More articles in Gospodarka Surowcami Mineralnymi / Mineral Resources Management from Sciendo
Bibliographic data for series maintained by Peter Golla ().