Electron Beam Welding of Gear Wheels by Splitted Beam

Dřímal Daniel ()
Additional contact information
Dřímal Daniel: PRVÁ ZVÁRAČSKÁ, a. s. Bratislava, (First Welding Company Inc.)

Research Papers Faculty of Materials Science and Technology Slovak University of Technology, 2014, vol. 22, issue 34, 35-41

Abstract: This contribution deals with the issue of electron beam welding of high-accurate gear wheels composed of a spur gearing and fluted shaft joined with a face weld for automotive industry. Both parts made of the high-strength low-alloy steel are welded in the condition after final machining and heat treatment, performed by case hardening, whereas it is required that the run-out in the critical point of weldment after welding, i. e. after the final operation, would be 0.04 mm max.. In case of common welding procedure, cracks were formed in the weld, initiated by spiking in the weld root. Crack formation was prevented by the use of an interlocking joint with a rounded recess and suitable welding parameters, eliminating crack initiation by spiking in the weld root. Minimisation of the welding distortions was achieved by the application of tack welding with simultaneous splitting of one beam into two parts in the opposite sections of circumferential face weld attained on the principle of a new system of controlled deflection with digital scanning of the beam. This welding procedure assured that the weldment temperature after welding would not be higher than 400 °C. Thus, this procedure allowed achieving the final run-outs in the critical point of gearwheels within the maximum range up to 0.04 mm, which is acceptable for the given application. Accurate optical measurements did not reveal any changes in the teeth dimensions.

Keywords: electron beam welding; beam deflection system (search for similar items in EconPapers)
Date: 2014
References: Add references at CitEc
Citations:

Downloads: (external link)
https://doi.org/10.2478/rput-2014-0025 (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:vrs:repfms:v:22:y:2014:i:34:p:7:n:5

DOI: 10.2478/rput-2014-0025

Access Statistics for this article

Research Papers Faculty of Materials Science and Technology Slovak University of Technology is currently edited by Kvetoslava Rešetová

More articles in Research Papers Faculty of Materials Science and Technology Slovak University of Technology from Sciendo
Bibliographic data for series maintained by Peter Golla ().