Wear of Cutting Tool with Excel Geometry in Turning Process of Hardened Steel

Samardžiová Michaela ()
Additional contact information
Samardžiová Michaela: Institute of Production Technologies, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, Ulica Jána Bottu 2781/25, 917 24 Trnava, Slovak Republic

Research Papers Faculty of Materials Science and Technology Slovak University of Technology, 2016, vol. 24, issue 38, 95-102

Abstract: This paper deals with hard turning using a cutting tool with Xcel geometry. This is one of the new geometries, and there is not any information about Xcel wear in comparison to the conventional geometry. It is already known from cutting tools producers that using the Xcel geometry leads to higher quality of machined surface, perticularly surface roughness. It is possible to achieve more than 4 times lower Ra and Rz values after turning than after using conventional geometry with radius. The workpiece material was 100Cr6 hardened steel with hardness of 60 ± 1 HRC. The machine used for the experiment was a lathe with counter spindle DMG CTX alpha 500, which is located in the Centre of Excellence of 5–axis Machining at the Faculty of Materials Science and Technology in Trnava. The cutting tools made by CBN were obtained from Sandvik COROMANT Company.The aim of this paper is to investigate the cutting tool wear in hard turning process by the Xcel cutting tool geometry.

Keywords: Hard turning; Xcel geometry; conventional geometry; cutting tool wear (search for similar items in EconPapers)
Date: 2016
References: Add references at CitEc
Citations:

Downloads: (external link)
https://doi.org/10.1515/rput-2016-0044 (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:vrs:repfms:v:24:y:2016:i:38:p:95-102:n:12

DOI: 10.1515/rput-2016-0044

Access Statistics for this article

Research Papers Faculty of Materials Science and Technology Slovak University of Technology is currently edited by Kvetoslava Rešetová

More articles in Research Papers Faculty of Materials Science and Technology Slovak University of Technology from Sciendo
Bibliographic data for series maintained by Peter Golla ().