EFFECTS OF PROCESS PARAMETERS AND CRYOTREATED ELECTRODE ON THE RADIAL OVERCUT OF AISI 304 IN SiC POWDER MIXED EDM
Munmun Bhaumik and
Kalipada Maity ()
Additional contact information
Munmun Bhaumik: Department of Mechanical Engineering, NIT Rourkela, Rourkela 769008, Orissa, India
Kalipada Maity: Department of Mechanical Engineering, NIT Rourkela, Rourkela 769008, Orissa, India
Surface Review and Letters (SRL), 2017, vol. 24, issue Supp02, 1-13
Abstract:
Powder mixed electro discharge machining (PMEDM) is further advancement of conventional electro discharge machining (EDM) where the powder particles are suspended in the dielectric medium to enhance the machining rate as well as surface finish. Cryogenic treatment is introduced in this process for improving the tool life and cutting tool properties. In the present investigation, the characterization of the cryotreated tempered electrode was performed. An attempt has been made to study the effect of cryotreated double tempered electrode on the radial overcut (ROC) when SiC powder is mixed in the kerosene dielectric during electro discharge machining of AISI 304. The process performance has been evaluated by means of ROC when peak current, pulse on time, gap voltage, duty cycle and powder concentration are considered as process parameters and machining is performed by using tungsten carbide electrodes (untreated and double tempered electrodes). A regression analysis was performed to correlate the data between the response and the process parameters. Microstructural analysis was carried out on the machined surfaces. Least radial overcut was observed for conventional EDM as compared to powder mixed EDM. Cryotreated double tempered electrode significantly reduced the radial overcut than untreated electrode.
Keywords: AISI 304; cryogenic treatment; powder mixed electro discharge machining; radial overcut; tungsten carbide (search for similar items in EconPapers)
Date: 2017
References: Add references at CitEc
Citations:
Downloads: (external link)
http://www.worldscientific.com/doi/abs/10.1142/S0218625X18500294
Access to full text is restricted to subscribers
Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.
Export reference: BibTeX
RIS (EndNote, ProCite, RefMan)
HTML/Text
Persistent link: https://EconPapers.repec.org/RePEc:wsi:srlxxx:v:24:y:2017:i:supp02:n:s0218625x18500294
Ordering information: This journal article can be ordered from
DOI: 10.1142/S0218625X18500294
Access Statistics for this article
Surface Review and Letters (SRL) is currently edited by S Y Tong
More articles in Surface Review and Letters (SRL) from World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().