EconPapers    
Economics at your fingertips  
 

EFFECT OF CONTACT PRESSURE ON FRETTING FATIGUE BEHAVIOR UNDER CYCLIC CONTACT LOADING

F. Abbasi and G. H. Majzoobi
Additional contact information
F. Abbasi: Mechanical Engineering Department, Faculty of Engineering, Bu-Ali Sina University, Hamadan, Iran
G. H. Majzoobi: Mechanical Engineering Department, Faculty of Engineering, Bu-Ali Sina University, Hamadan, Iran

Surface Review and Letters (SRL), 2017, vol. 24, issue Supp02, 1-14

Abstract: In this study, the effect of contact pressure on fretting fatigue behavior of Al7075-T6 under cyclic normal contact loading is investigated. It is found that fretting fatigue life for the case of cyclic contact load was significantly less than that for constant contact load at the same axial and contact load levels, particularly for High Cycle Fatigue (HCF) conditions. The results showed that the fretting fatigue life decreased monotonically with the increase in normal contact load for all axial stresses. Examination of the fretting scars was performed using optical microscopy and numerical simulation was carried out using commercial finite element (FE) codes ABAQUS® and FRANC2D/L® to calculate the crack propagation life. The crack initiation life was calculated by a combination of numerical and experimental results. Finally, the FE simulation was validated by a comparison between the numerical crack growth rate and the experimental measurement using replica.

Keywords: Fretting fatigue; cyclic contact loading; crack propagation; crack initiation; Al7075; FEA; contact pressure (search for similar items in EconPapers)
Date: 2017
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
http://www.worldscientific.com/doi/abs/10.1142/S0218625X18500324
Access to full text is restricted to subscribers

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:wsi:srlxxx:v:24:y:2017:i:supp02:n:s0218625x18500324

Ordering information: This journal article can be ordered from

DOI: 10.1142/S0218625X18500324

Access Statistics for this article

Surface Review and Letters (SRL) is currently edited by S Y Tong

More articles in Surface Review and Letters (SRL) from World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().

 
Page updated 2025-03-20
Handle: RePEc:wsi:srlxxx:v:24:y:2017:i:supp02:n:s0218625x18500324