THE EFFECT OF ELECTROLYTE TEMPERATURE AND SEALING SOLUTION IN ANODIZING OPERATION ON HARDNESS AND WEAR BEHAVIOR OF 7075 -T6 ALUMINUM ALLOY
Saeed Niyazbakhsh,
Kamran Amini and
Farhad Gharavi
Additional contact information
Saeed Niyazbakhsh: Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran
Kamran Amini: Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran†Department of Mechanical Engineering, Tiran Branch, Islamic Azad University, Isfahan, Iran
Farhad Gharavi: #x2021;Department of Materials Engineering, Sirjan Branch, Islamic Azad University, Sirjan, Iran
Surface Review and Letters (SRL), 2019, vol. 26, issue 02, 1-7
Abstract:
Anodic oxide coatings are applied on aluminum alloys in order to improve corrosion resistance and to increase hardness and wear resistance. In the current study, a hard anodic coating was applied on AA7075-T6 aluminum alloy. To survey the anodizing temperature (electrolyte temperature) effect, three temperatures, namely, −5∘C, 0∘C and 5∘C were chosen and the samples were sealed in boiling water and sodium dichromate to study the role of sealing. For measuring the oxide coatings porosity and hardness and also for comparing the samples’ wear resistance field-emission scanning electron microscopy (FESEM), microhardness test and pin-on-disk method were utilized, respectively. The results showed that by increasing the anodizing temperature, hardness and consequently wear resistance decreased so that hardness and weight loss in the samples with no sealing decreased from 460HV and 0.61mg at −5∘C to 405 and 358HV and 1.05 and 1.12mg at 0∘C and 5∘C, respectively, which is due to the porosity increment by increasing the anodizing temperature. Also, sealing in boiling water and dichromate contributed to soft phases and coating hydration, which resulted in a decrease in hardness and wear resistance. Hardness and weight loss in the coated samples at −5∘C decreased from 460HV and 0.61mg in the samples with no sealing to 435 and 417HV and 0.72 and 0.83mg in the samples sealed in boiling water and dichromate, respectively.
Keywords: 7075 aluminum alloy; anodizing; wear behavior; hardness (search for similar items in EconPapers)
Date: 2019
References: View complete reference list from CitEc
Citations:
Downloads: (external link)
http://www.worldscientific.com/doi/abs/10.1142/S0218625X18501433
Access to full text is restricted to subscribers
Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.
Export reference: BibTeX
RIS (EndNote, ProCite, RefMan)
HTML/Text
Persistent link: https://EconPapers.repec.org/RePEc:wsi:srlxxx:v:26:y:2019:i:02:n:s0218625x18501433
Ordering information: This journal article can be ordered from
DOI: 10.1142/S0218625X18501433
Access Statistics for this article
Surface Review and Letters (SRL) is currently edited by S Y Tong
More articles in Surface Review and Letters (SRL) from World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().