MEASUREMENT OF SURFACE QUALITY AND OPTIMIZATION OF CUTTING PARAMETERS IN SLOT MILLING OF GFRP COMPOSITE MATERIALS WITH DIFFERENT FIBER RATIOS PRODUCED BY PULTRUSION METHOD

Harun Yaka ()
Additional contact information
Harun Yaka: Mechanical Engineering Department, Faculty of Technology, Amasya University, Amasya, Turkey

Surface Review and Letters (SRL), 2021, vol. 28, issue 10, 1-12

Abstract: The final shape of fiber-reinforced polymer (FRP) materials is usually given by machining. However, machining FRP materials is complex and difficult. Appropriate cutting tools and cutting parameters should be determined to overcome these difficulties. In this work, glass fiber-reinforced polymer (GFRP) materials with 60% and 68% fiber ratio, produced by pultrusion method, were machined. End of the milling, surface roughness (Ra), delamination damage factor (Fdd), sound and vibration results were analyzed. Experiments were carried out with Taguchi L16 mixed design and the results were analyzed by Taguchi, ANOVA and Pareto charts. In Taguchi and Pareto analyses, the most effective parameter for surface roughness and delamination damage factor was the feed rate, and the cutting velocity for sound and vibration. Different regression models have been tried. Linear regression was found as most suitable. The significance values of the regression models are 92.04% for surface roughness, 87.12% for delamination damage factor, 98.64% for sound and 73.27% for vibration.

Keywords: ANOVA; CNC vertical machining center; delamination damage factor; GFRP; milling; pultrusion; surface roughness; taguchi method; vibration (search for similar items in EconPapers)
Date: 2021
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.worldscientific.com/doi/abs/10.1142/S0218625X21500955
Access to full text is restricted to subscribers

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:wsi:srlxxx:v:28:y:2021:i:10:n:s0218625x21500955

Ordering information: This journal article can be ordered from

DOI: 10.1142/S0218625X21500955

Access Statistics for this article

Surface Review and Letters (SRL) is currently edited by S Y Tong

More articles in Surface Review and Letters (SRL) from World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().