NUMERICAL SIMULATION STUDY ON THE REACTION PERFORMANCE OF A METHANOL STEAM REFORMING TO HYDROGEN MICROREACTOR

Xueye Chen and Zhanpeng Yuan
Additional contact information
Xueye Chen: College of Transportation, Ludong University, Yantai, Shandong 264025, P. R. China
Zhanpeng Yuan: ��Faculty of Mechanical Engineering and Automation, Liaoning University of Technology, Jinzhou, Liaoning 121001, P. R. China

Surface Review and Letters (SRL), 2023, vol. 30, issue 05, 1-12

Abstract: Hydrogen has received widespread attention as a new clean energy in order to reduce the carbon emissions of fuel vehicles. This paper studies a tubular microreactor based on methanol steam reforming. Methanol and steam are mixed in proportion and the chemical reaction takes place in a porous catalytic bed. For heating purposes, hot gas from the burner penetrates the reactor bed through heating tubes. Energy is supplied through the heating tubes to drive the endothermic reaction system. The microreactor is enclosed in an insulated jacket. In this paper, parameters such as methanol conversion and hydrogen concentration are evaluated by considering microreactor materials, heating gas temperature and flow direction, heating tube distribution, pressure drop and reaction channel length. First of all, choosing a microreactor material with a smaller thermal conductivity can avoid excessive heat loss, and improve heat transfer performance. Increasing the heating gas temperature leads to an increase in the temperature of the reaction zone, thereby increasing the CH3OH conversion rate and H2 mass fraction. Changing the flow direction of the heating gas affects the reaction rate, but has little effect on the reaction result. Through the research on the distribution of the heating tubes, the results show that the hydrogen production rate is higher when the contact area between the heating tubes and the reaction zone is larger. Secondly, through the comparison of the data under different pressure drops, the best parameter P=50pa is obtained, and the CH3OH conversion rate is 80.6% at this time. Finally, increasing the length of the reaction channel can make the reaction more complete. For example, when the reaction channel length L=0.39m, the CH3OH conversion rate is as high as 83.7%.

Keywords: Hydrogen production from methanol; microreactor; catalytic reaction; numerical simulation (search for similar items in EconPapers)
Date: 2023
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.worldscientific.com/doi/abs/10.1142/S0218625X23500300
Access to full text is restricted to subscribers

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:wsi:srlxxx:v:30:y:2023:i:05:n:s0218625x23500300

Ordering information: This journal article can be ordered from

DOI: 10.1142/S0218625X23500300

Access Statistics for this article

Surface Review and Letters (SRL) is currently edited by S Y Tong

More articles in Surface Review and Letters (SRL) from World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().