PREDICTIVE MODELING AND OPTIMIZATION OF CUTTING PARAMETERS IN HIGH SPEED HARDENED TURNING OF AISI D2 STEEL USING RSM, ANN AND DESIRABILITY FUNCTION

Hamama Mebrek, Salah Mansouri, Youssef Touggui, Hacene Ameddah, Mohamed Athmane Yallese and Hadj Mohamed Benia
Additional contact information
Hamama Mebrek: Innovation Laboratory in Eco-Design Construction and Seismic Engineering, Batna 2, Algeria
Salah Mansouri: Innovation Laboratory in Eco-Design Construction and Seismic Engineering, Batna 2, Algeria
Youssef Touggui: ��Mechanics and Structures Research Laboratory (LMS), May 8th 1945 University of Guelma, Guelma Algeria‡Applied Mechanics and Energy Systems Laboratory, Faculty of Applied Sciences, Kasdi Merbah Ouargla University, 30000, Algeria
Hacene Ameddah: Innovation Laboratory in Eco-Design Construction and Seismic Engineering, Batna 2, Algeria
Mohamed Athmane Yallese: ��Mechanics and Structures Research Laboratory (LMS), May 8th 1945 University of Guelma, Guelma Algeria
Hadj Mohamed Benia: �Mechanics Research Centre, CRM, Constantine, Algeria

Surface Review and Letters (SRL), 2024, vol. 31, issue 05, 1-16

Abstract: High speed machining (HSM) is an attractive process for numerous applications due to its potential to increase production rates, reduce lead times, lower costs, and enhance part quality. In this study, high-speed turning operations on AISI D2 steel using a coated carbide cutting tool under dry conditions were conducted. The cutting parameters examined in this investigation were Vc, f, and ap, while the outputs measured were surface roughness (Ra), cutting temperature (T), and flank wear (VB). To obtain reliable and accurate results, a Taguchi L27 orthogonal array for the 27 experimental runs was employed as well as analysis of variance (ANOVA), response surface methodology (RSM), and artificial neural network (ANN) to develop a constitutive relationship between prediction responses and the cutting parameters. The ANOVA results showed that Vc had a significant effect on T (36.81%) and VB (27.58%), while f had a considerable influence on Ra (24.21%). Additionally, nonlinear prediction models were created for each measured output and their accuracy was evaluated using three statistical indices: coefficient of determination (R2), mean absolute percentage error (MAPE), and root mean square error (RMSE). Finally, multi-objective optimization was successfully carried out using the desirability function (DF) approach to propose an optimal set of cutting parameters that simultaneously minimized Ra, T, and VB. The optimized cutting parameters were Vc = 477.28 m/min, f = 0.08 rev/min, and ap = 0.8 mm, resulting in Ra = 1.23 μm, T = 129.9∘C, and VB = 0.049 mm.

Keywords: High speed turning; optimization; surface roughness; cutting temperature; tool wear (search for similar items in EconPapers)
Date: 2024
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.worldscientific.com/doi/abs/10.1142/S0218625X24500367
Access to full text is restricted to subscribers

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:wsi:srlxxx:v:31:y:2024:i:05:n:s0218625x24500367

Ordering information: This journal article can be ordered from

DOI: 10.1142/S0218625X24500367

Access Statistics for this article

Surface Review and Letters (SRL) is currently edited by S Y Tong

More articles in Surface Review and Letters (SRL) from World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().