MODELING AND SIMULATION OF MAGNETRON-SPUTTERRED NiTi THIN FILM DEPOSITION BY SRIM/TRIM

Ajit Behera (), Kuldeep Saxena, Chander Prakash, Alokesh Pramanik, Julfikar Haider, Animesh Basak and S. Shankar
Additional contact information
Ajit Behera: Department of Metallurgical & Materials Engineering, National Institute of Technology, Rourkela, Odisha 769008, India
Kuldeep Saxena: ��School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India
Chander Prakash: ��School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India‡Division of Research and Development, Lovely Professional University, Phagwara, Punjab, India
Alokesh Pramanik: �Department of Mechanical Engineering, Curtin University, Bentley, Australia
Julfikar Haider: �Department of Engineering, Manchester Metropolitan University, Manchester, UK
Animesh Basak: ��Adelaide Microscopy, The University of Adelaide, Adelaide, Australia
S. Shankar: *Research and Development Cell, Kongu Engineering College, Erode, Tamil Nadu, India

Surface Review and Letters (SRL), 2025, vol. 32, issue 06, 1-19

Abstract: Nickel-Titanium (Ni-Ti) thin films have gained a lot of attention due to their unique features, such as the shape memory effect. Micro-actuators, micro-valve, micro-fluid pumps, bio-medical applications, and electronic applications have a lot of interest in these smart thin films. Sputter-deposited NiTi thin films have shown the potential to be very useful as a powerful actuator in micro-electro-mechanical systems (MEMS) because of their large recovery forces and high recoverable strains. Despite the advancement of improved deposition methods for the NiTi thin films, there are still certain unsolved challenges that impede accurate composition control throughout the deposition process. Many applications, spanning from the aerospace industries to a range of nanotechnologies, require knowledge of the sputtering characteristics of the materials that are subjected to bombardment, ejection, and deposition of ions. In recent decades, atomic scale modeling has been given a high emphasis in ion sputtering research, providing an adequate and precise description of collision cascades in solids using the Stopping and Range of Ions in Matter (SRIM) and Transport of Ions in Matter (TRIM). In this paper, SRIM is used to address how the heavy ions interact with the target materials. A variety of ion-solid interaction characteristics, including the sputter yield, have been determined by simulating collision cascades in the solids. On the other hand, TRIM was used to describe the range of ions that enter into the matter and cause damage to the target throughout the process. The simulation was carried out to compare the sputtering yield of Ni and Ti by varying the energy input (from 300V to 1300V). SRIM simulation was conducted by varying the thickness of the film, the angle of incidence of ions, and the energy involved in the sputtering process. The characterization of the films has been carried out using Field Emission Scanning Electron Microscopy (FESEM) to comprehend the surface and interface morphologies of the films and to validate the simulated results. With an increase in energy input (target voltage), the sputtering yield increased. The sputtering yield of the Ni target was higher than the Ti target indicating that Ni can be removed relatively easier than Ti.

Keywords: NiTi; thin film; sputtering; ions; energy; angle of incident (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.worldscientific.com/doi/abs/10.1142/S0218625X2340005X
Access to full text is restricted to subscribers

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:wsi:srlxxx:v:32:y:2025:i:06:n:s0218625x2340005x

Ordering information: This journal article can be ordered from

DOI: 10.1142/S0218625X2340005X

Access Statistics for this article

Surface Review and Letters (SRL) is currently edited by S Y Tong

More articles in Surface Review and Letters (SRL) from World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().