Analytical approximations to the viscous glass-flow problem in the mould-plunger pressing process, including an investigation of boundary conditions

S. W. Rienstra and T. D. Chandra
Additional contact information
S. W. Rienstra: Eindhoven University of Technology, Department of Applied Mathematics and Computing Science
T. D. Chandra: State University of Malang, Department of Mathematics

A chapter in Practical Asymptotics, 2001, pp 241-259 from Springer

Abstract: Abstract Industrial glass is produced at temperatures above 600°C, where glass becomes a highly viscous incompressible fluid, usually considered as Newtonian. In the production two phases may be distinguished, namely the pressing phase and the blowing phase. This study will be concerned with glass flow in the pressing phase, which is called thus because a blob of fluid glass (called a gob) is pressed in a mould by a plunger, such that the glass flows between mould and plunger, in order to obtain the preform of a bottle or jar, called a parison. In the blowing phase (not considered here) the parison is subsequently blown into the final shape of the product. By application of the slender geometry of mould and plunger and a cylindrical symmetry, a form of Reynolds’s lubrication flow equations is obtained. These equations are solved by utilizing the incompressibility of the glass, by which the flux at any axial cross section is determined for prescribed plunger velocity, leading to analytical results in closed form for velocity field and pressure gradient. The glass level is implicitly defined by the integral over the varying volume which is to remain constant. The pressure may then be determined by integration. Special attention is given to the required boundary conditions. It is known that, depending on several problem parameters like temperature, pressure, and smoothness of the wall, the glass flow slips, to some extent, along the wall. Therefore, this study includes a general formulation of the boundary condition of partial slip in the form of a linear relation between shear stress and slip velocity, also known as Navier’s slip condition. The coefficient of this relation, a positive number, may vary in our solution with axial position, but depends on the problem and is to be obtained from (for example) experiment. Two special cases, which seem to be relevant in practice, are considered as examples: (i) no slip on both plunger and mould; (ii) no slip on the mould and full slip (zero friction) on the plunger. The results are compared with fully numerical (FEM) solutions of a Stokes-flow model, and the agreement is good or excellent. Since in any practical situation it is not the plunger velocity which is prescribed, but (within practical limits) the force applied by the plunger, the problem of a prescribed plunger force has also been investigated.

Keywords: glass; viscous flow; slender geometry; slip and no-slip boundary conditions; lubrication theory (search for similar items in EconPapers)
Date: 2001
References: Add references at CitEc
Citations:

There are no downloads for this item, see the EconPapers FAQ for hints about obtaining it.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:spr:sprchp:978-94-010-0698-9_13

Ordering information: This item can be ordered from
http://www.springer.com/9789401006989

DOI: 10.1007/978-94-010-0698-9_13

Access Statistics for this chapter

More chapters in Springer Books from Springer
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().