Tracking the maximum power point of solar panels through direct estimation of optimum voltage with temperature

Mohammed El Bachir Ghribi, Luis Garcia-Gutierrez (), Zine Eddine Touhami Ternifi, Zhixue Zheng, Ghalem Bachir and Michel Aillerie
Additional contact information
Luis Garcia-Gutierrez: LMOPS - Laboratoire Matériaux Optiques, Photonique et Systèmes - CentraleSupélec - UL - Université de Lorraine
Zhixue Zheng: LMOPS - Laboratoire Matériaux Optiques, Photonique et Systèmes - CentraleSupélec - UL - Université de Lorraine
Ghalem Bachir: USTO MB - Université des sciences et de la Technologie d'Oran Mohamed Boudiaf [Oran]
Michel Aillerie: LMOPS - Laboratoire Matériaux Optiques, Photonique et Systèmes - CentraleSupélec - UL - Université de Lorraine

Post-Print from HAL

Abstract: Abstract Electricity production from photovoltaic panels is maximized when the operating point is located at the maximum power point thanks to dedicated controllers. These controllers are driven to track the maximum power by various algorithms within distributed or centralized architectures accounting for factors like partial irradiation and temperature changes. The effect of irradiance on the optimal panel voltage is weak or even negligible, while it is strong and quasi-linear dependent on temperature. Base on this observation, this article introduces a straightforward method for tracking by an optimizer the maximum power of a photovoltaic panel focusing solely on its temperature response as an input variable. The proposed approach hinges on linearizing the relationship between panel temperature and operating voltage. This relationship enables the estimation of the maximum power point through temperature measurement alone. Thus, after determination of the linear temperature coefficient of Voltage requiring only the knowledge of two optimal voltages at different temperatures, for example from the datasheet of the panel, the power tracking involves only one temperature sensor placed on the panel alongside a voltage sensor for regulation. The method's principle, modeling, and validation post-panel aging are detailed in the paper. Simulation, conducted with real experimental irradiation and temperature data attests to the control's effectiveness. Results indicate an average effectiveness of the method above 99.1% in tracking the maximum power, with the panel generating 2.33 kWh out of a possible 2.35 kWh. This performance is comparable to that of tracking devices employing more complex algorithms. The simplicity and efficiency of the method make it a promising option for maximizing the power production at low cost from photovoltaic systems in small or residential, on- or off-grid connected applications.

Date: 2024-05-22
References: Add references at CitEc
Citations:

Published in Journal of Clean Energy Technologies (JOCET), 2024, ⟨10.1093/ce/zkae044⟩

There are no downloads for this item, see the EconPapers FAQ for hints about obtaining it.

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:hal:journl:hal-04619485

DOI: 10.1093/ce/zkae044

Access Statistics for this paper

More papers in Post-Print from HAL
Bibliographic data for series maintained by CCSD ().