CFD and kinetic modelling study of methane MILD combustion in O2/N2, O2/CO2 and O2/H2O atmospheres

Yaojie Tu, Mingchen Xu, Dezhi Zhou, Qingxiang Wang, Wenming Yang and Hao Liu

Applied Energy, 2019, vol. 240, issue C, 1003-1013

Abstract: To deepen the understanding of combining moderate or intense low-oxygen dilution (MILD) combustion with oxy-fuel combustion for enhancing flame stability while realizing carbon capturing and storage, this paper presents a numerical study of methane MILD combustion in three atmospheres, i.e.: O2/N2, O2/CO2 and O2/H2O, with both computational fluid dynamics (CFD) and kinetic calculation approaches. Firstly, CFD predictions for the three conditions were performed following a systematic validation of the numerical method against experimental measurement from methane/air MILD combustion in a laboratory-scale closed furnace. Subsequently, kinetic calculations with a well-stirred reactor model was used to quantitatively identify the operating ranges of MILD combustion in the three atmospheres for methane. Moreover, the kinetic calculation provided additional insight into the fuel oxidation pathway. The results reveal that replacing N2 with either CO2 or H2O would help to establish MILD combustion mode from the viewpoint of lower temperature increase, due to both physical and chemical property discrepancies among the diluents. Specifically, the chemical effect and physical effect are responsible to the lower temperature rise for CO2-diluted case and H2O-diluted case, respectively. Inside the MILD combustion furnace, the negative heat release region disappears in regardless of atmospheres, indicating the eliminated fuel pyrolysis process under MILD combustion mode. Detailed analysis of the flame structure suggests that the combustion regimes inside the furnace in the three atmospheres are all in well-stirred combustion regime, and CO2-diluted case has the most extended reaction zone. Kinetic calculation indicates that CO2 or H2O dilution would result in a wider MILD combustion operating range compared to N2 dilution, while it is more pronounced for CO2. These observations all imply that MILD combustion will be more easily established with CO2 dilution than N2 or H2O dilution. However, higher CO formation is obtained in O2/CO2, forcing more attention to be paid on CO emission under CO2-diluted MILD combustion. Furthermore, the hydrocarbon recombination route is negligible under MILD combustion in spite of the atmospheres, implying lower sooting tendency as compared with conventional combustion.

Keywords: MILD combustion; Oxy-fuel combustion; CFD modelling; Kinetic modelling; Flame structure (search for similar items in EconPapers)
Date: 2019
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (10)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261919303459
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:240:y:2019:i:c:p:1003-1013

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2019.02.046

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().