Design and optimization of power conversion system for a steady state CFETR power plant

Muhammad Salman Khan, Guo Bin, Peng Xuebing and Yunthao Song

Energy, 2024, vol. 308, issue C

Abstract: A promising magnetic fusion steady state reactor is Chinese Fusion Engineering Testing Reactor (CFETR) and a different power conversion system is required than tokamak reactor. The control and utilization of high outlet temperature and thermal power generated by the fusion reactor efficiently are the main challenges in the field of thermo-fusion technology. An efficient and optimized power conversion system is an urge for the thermo-fusion energy system with a candidate working fluid under high temperature and pressure. Five cycle topologies based on the Brayton cycle have been designed such as multi stage expansion and recompression cycle with intercooling, recompression cycle with intercooling, partial expansion with multistage compression, partial expansion and partial recompression with cooling across range of turbine and compressor inlet temperatures. Brayton cycle with different system configurations have been simulated with He-gas and supercritical Carbon Dioxide (CO2) to conceive high outlet temperature of CFETR about 500 °C and thermal power of 200 MWth for better thermal performance by using REFPROP, EES and analytical model has been developed with MATLAB. The supercritical CO2 has better thermal performance about 36.18 % as compared to He-gas has 29.81 % under same thermal conditions. The Schematic-I with addition of preheat and recompression enhance the thermal performance about 2 % and has been proposed for CFETR. The effect of change in pressure of the system, effect of the working fluid, isentropic efficiency, heat rate and back to work ratio on the thermal performance and network output have been analyzed and optimized based on analytical model with the MATLAB. The system net power is increased from 69.20 MW to 79.71 MW, heat rejected by the system is decreased from 134.46 MW to 127.06 MW and thermal performance is increased about 34.62 %–39.85 % with pressure from 24 MPa to 28 MPa. Using multi stage expansion and recompression cycle with intercooling instead of other topologies can improve the thermal performance up to 6.1 % depends upon the operation conditions and working fluid. The heat rate of the system decreased while back work ratio increased with the pressure and it reveal that calculations are correct.

Keywords: CFETR; Fusion reactor; Steady state; Thermal performance; Optimization; Brayton cycle (search for similar items in EconPapers)
Date: 2024
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0360544224027683
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:308:y:2024:i:c:s0360544224027683

DOI: 10.1016/j.energy.2024.132994

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().